Browse products by name
Laser Components has unveiled its H0 series of photodiodes receivers that are supplied in a compact, modified TO5 housing with a diameter of about 5mm
Elliot Scientific has released a small-core, high-power multimode, mid-infrared fibre for use in medical, industrial and R&D applications from IRphotonics of Hamden, Connecticut
Hamamatsu Photonics has introduced a brand new hybrid photodetector module, the H10777.
Z-Laser produces the H8-M18 and H6-M18 precision mountings for use with all lasers with M18 thread
Labsphere and Otsuka Electronics have collaborated to develop a new light measurement system, known as the HalfMoon Total Forward Spectral Flux Measurement System, which has been designed for manufacturers of LEDs, light fixtures.
AMS Technologies has launched Fiberguide Industries' line of large core multimode optical fibres.
Laser Components now offers a range of Optometrics' hard-coated laser line long pass filters that use its Quasar technology to deliver a transmission of >90 per cent with deep OD6 blocking
Saint-Gobain Crystals has introduced a series of high-performance harmonic separators, optimised for use with high-power solid-state lasers. Both short-wave pass and long-wave pass designs are available
APE has introduced the HarmoniXX product line - a series of frequency converters for mode-locked ultrafast lasers, particularly Ti:sapphire lasers but also suitable for other wavelength ranges
Photonic Solutions is distributing Harpia, a transient absorption spectrometer, developed by Light Conversion for use with the latter's Pharos/Orpheus laser systems
Imagine Optic has introduced its HP-16, the latest addition to its HASO family of Shack-Hartmann wavefront sensors for adaptive optics and metrology applications.
EdgeWave has introduced the new HD series of high-power Innoslab-lasers for industrial and scientific applications. The average powers of model HD40I-E and HD60I-E lasers are 400W and 600W respectively.
EdgeWave has introduced its q-switched and frequency doubled HD40II-E Innoslab laser, along with its Innoslab IS10I-A and its frequency doubled Innoslab IS10II-A ultra-fast pulse amplifiers
Digital View has introduced the HE Series of COTS LCD controllers designed to comply with the strict standards required for the harsh environments encountered in military and industrial applications.
Laservision has released its Head Support System (HSS), which is a new support system for laser goggles. The HSS is suitable for heavy laser goggles.
Chiral Photonics has released a robust fibre optic temperature sensor to its Helica product family. The sensor has been designed for applications that require stability to 1,000°C.
In co-operation with Feinmess Dresden, 3D-Micromac has developed a new concept of a helical drilling optic, which uses aerostatic instead of the usual mechanical bearings
Helio-Strob compact 75, distributed by Alrad Instruments, is a mobile strobing light source for industrial use. Extremely short flash impulses with constant brightness enable the slowed-down observation mode of fast processes
Edmund Optics is offering hemispherical lenses made from sapphire. The lenses are well-suited for a wide variety of applications, including fibre communications equipment, endoscopes, microscopes, and optical pick-up devices.
Frankfurt Laser Company is providing a new line of temperature-stabilised laser diode modules. The HEML laser modules provide high output power for machine vision applications in harsh environments.
JDSU's range of HeNe lasers and power supplies are now available in Europe from Photonic Solutions
Heraeus Noblelight has developed Heraeus Ignite Technology (HIT), a manufacturing process that helps to reduce the ignition voltage of arc and flash lamps, used in laser-based range finders and laser excitation
Intense has released its Hermes DDL, a turnkey Direct Diode Laser system. Powered by Intense's QWI enabled high temperature QCW stack technology, Hermes DDL is the company's first turnkey industrial laser system
Intense has launched the next generation of its Hermes diode lasers, a 650W, ultra-compact QCW mini-stack offering maximum brightness at high operating temperatures
Intense has expanded its range of high power QCW bars and stacked array products. The Hermes stacked array line now includes higher power QCW laser diodes, ranging from 600 to 3,000W, qualified to MIL-standards
Laser Components has introduced its HI -Series and HI HIHI-FAC Series pulsed laser diodes at 1,550nm for applications in rangefinder systems
Laser Components has introduced its new 808nm laser diodes for pumping applications, supplying 10W of CW output power from a 200Ám single chip emitter in a standard C-mount package
Dilas has developed a high brightness, conduction-cooled, fibre-coupled diode laser module based on diode laser bars, which provides up to 40W output power from a 100-micron fibre core at a wavelength of 976nm with a numerical aperture of <0.22
Edmund Optics has introduced a new line of High Dynamic Range Cameras, which provide images from the visible to the NIR for a wide variety of challenging applications
Andor Technology has announced the availability of its new comprehensive high energy detection portfolio
Sofradir has announced its High Operating Temperature L-HOT medium wave infrared integrated detector cooler assembly prototype that the company claims offers a significantly improved detection range over earlier models
Optical Surfaces Ltd (OSL) has released a series of beam collimators, which are manufactured to better than lambda/10 p-v surface accuracy with an off-axis design that produces no central obscuration and obtains highly efficient transmission.
Special Optics has released a family of high performance large output laser beam expanders.
BBN International has launched an addition to its Agiltron family of optical switches within its existing range of fibre optic solutions.
REO now offers high performance pentaprisms with coatings optimised for demanding laser applications, such as target designation and rangefinding
Bookham has launched a new high power 808nm laser diode bar that can enable direct energy laser systems and range guided imaging for defence and security applications
Oclaro has launched an extended portfolio of high power laser diode bars, including the 100W 808nm bar, aimed at directed energy, DPSS laser and multi-kilowatt direct diode applications
Altechna has released its Laser Diode Driver, which is an electronic device that combines high power current source (up to 10A) for laser diode (LD) and two controllers for Peltier thermoelectrical coolers (TECs).
Hamamatsu has introduced a new range of very high power laser diode stacked bar arrays, capable of emitting at powers of 40W, 600W, 1.0kW, 5.0kW and 11.0kW
Marl Optosource has released a range of high power LED drivers to complement Lamina's TitanTurbo, believed to be one of the world's brightest LED light engines.
Intense has released an expanded range of high power QCW Bars and Stacked Array products.
Reynard has introduced high precision coatings for Galvanometer mirrors appropriate for the most demanding commercial and military applications.
Welch Allyn has released a selection of high stability lamps, which will be distributed by BFi OPTiLAS.
Optical Surfaces produces high precision telescope spectrograph optics, such as aspheres, mirrors, prisms, lenses and flats.
Recognising the need for a higher resolution USAF 1951 test chart, Pyser-SGI has just introduced four new versions with detail down to Group 9, Element 3.
B&WTek is launching its high resolution and wavelength stabilised Cleanlaze technology NIR (785nm) laser for Raman spectroscopy.
DDP has developed a low-profile LED light source that provides task lighting in a surgical fluid and blanket warmer designed to keep these materials at a consistent temperature.
nLight has released its 0.75W 635nm high-brightness single-emitter diode laser that makes use of its nXLT technology. Available in either C-mount or HHL packages, it provides 0.75W of optical power from a 150ým wide emitter at 635nm.
AMS Technologies has introduced Princeton Lightwave's high-performance fibre coupled laser diode with a high power of 400mW at 1550nm.
Saint-Gobain Crystals has introduced a range of high-performance, thin-film plate polarisers optimised for use with Nd:YAG, Nd:YVO4 and Nd:YLF lasers operating at 1064nm, 1053nm, 532nm, 355nm and 266nm
Alfalight has launched the AM6-808B and AM6-808BW, which provide 5W of 808nm light output with a 200µm 0.15 NA fibre, and the AM6-940B, which provides 10W of 940nm light output with a high brightness 105µm 0.15 NA fibre
Photon has introduced its new high-power adapter for the LD8900 and LD8900R goniometric radiometer far-field profilers, which extends the real-time measurement capability to power levels in the kilowatt range
Laser Components now offers high-power cables with connectors and copper ferrules. The use of copper as a ferrule material guarantees optimal heat removal
Dilas has released high-power diode laser arrays, one which operates at 1940nm with wall plug efficiencies of >10 per cent and another which operates at 1550nm.
Pro-Lite Technology his offering a new series of laser diodes using a non-absorbing mirror (NAM) technology that yields CW output powers up to 10W from 100┬Ám single emitters.
Laser Components has introduced a new range of high-power pulsed laser diodes (PLDs), produced at its Canadian facility, including single emitters, multi-junction PLDs, and stacked designs at 905 and 1,550nm
Dilas has introduced a range of high-power vertical diode laser stacked arrays available at 9xxnm (915nm, 940nm and 980nm) wavelength with 150W output power, continuous-wave (CW) per bar.
Dilas has released a series of high-power, water-cooled diode laser arrays used in scalable stack designs that deliver up to 80W CW per bar at standard wavelength of 808nm, 940nm and 980nm for industrial applications.
Newport has introduced high-precision adjustment screws with a 170-thread-per-inch (TPI) thread pitch, providing a 43 per cent improvement in sensitivity over standard 100-TPI adjustment screws
Thorlabs has released a new high-speed Shack-Hartmann wavefront sensor incorporating a CMOS sensor capable of measuring wavefronts at frame rates up to 450Hz
Sensors Unlimited has released a higher line rate for the high resolution SU-LDH digital line scan near-infrared camera.
Toptica has released the HighFinesse WS6-200 IR3 wavelength meter, providing precise and fast wavelength measurement in the mid-infrared (IR). This system performs measurements in a wavelength range from 2-11um
Coherent has introduced the HighLight 1000F, a fibre-delivered direct diode system for industrial applications, producing 1kW at 975nm from a 600Ám core fibre with a numerical aperture of 0.22.
Coherent has released the HighLight D-Series, a range of diode laser systems delivering both high power and an increased range of 'smart' output beam shapes
Coherent has announced a new range of diode laser systems, the HighLight D-Series, featuring a range of output beam shapes
Coherent has introduced the HighLight FAP 60/810 System, a fibre delivered, turnkey diode laser system which provides 60W of output power at 810nm suitable for OLED display processing
Newport Corporation's Spectra-Physics Lasers Division has launched two Q-switched diode-pumped solid state (DPSS) lasers with improved cost-per-watt for photovoltaic manufacturing applications.
Newport Corporation's Spectra-Physics Lasers Division has released the Hippo 532-14, a new addition to its Hippo family of Q-switched DPSS industrial lasers, featuring 14W of 532nm output at 100kHz.
Oclaro's HL63142DG high-power red laser diode is the first ever laser diode to offer an inbuilt monitor photodiode at 637nm, the company claims
Photonic Products has introduced two new red laser diodes from Opnext that combine a low operating current with a high optical output power for use in scanners and measuring equipment.
Opnext has released a 642nm, 150mW, single longitudinal mode semiconductor laser diode with TE mode oscillation, called the Opnext HL6385DG.
Opnext has released its HL6387TG laser diode for use in miniature display applications.
ProPhotonix has added the HL65051DG laser diode from Opnext to its wide range of existing laser diodes
Photonic Products has introduced two high-power, infrared GaAlaS laser diodes from Opnext for industrial and medical sensors, distance meters, barcode scanners and high resolution CTP.
ZC&R Coatings for Optics, part of Abrisa, has introduced a full line of heat control, dichroic optical coatings that filter unnecessary energy (heat) from a light source
Spectrum Scientific has introduced replicated hollow corner cube retroreflectors to its line of standard services
Laser Components has launched a new range of elliptical diffusers for excimer lasers, which transform an elliptical excimer beam to a uniform round spot, manufactured by Holo-Or (Rehovoth, Israel)
Elliot Scientific is distributing the LR-C 1080 high resolution spatial light modulator (SLM), manufactured by Holoeye Photonics. The device features WUXGA resolution of 1,920 x 1,200 pixels
Elliot Scientific has announced the introduction of several new Spatial Light Modulators (SLMs) from Holoeye Photonics
Laser Components has announced the availability of a range of holographic wire grid polarisers from Optometrics USA
Dilas has recently begun producing solutions for homogenised area illumination, with applications in thermal and medical applications
The next generation of homogenisation modules from LIMO is based on a modular mechanical and optical concept.
Holo/Or innovation has improved the performance of its Homogenizer diffuser product line
Honeywell Safety Products has introduced the Honeywell Rio laser safety eyewear, which combines safety with comfort, and is able to fit over prescription glasses or used standalone
Designed with optimal mechanical and optical integrity, Horizon gives full and convenient access to wavelengths between 192-2750nm
Dilas has expanded its range of horizontal stacked arrays, now available with between 2 and 13 bars, at 808nm and 940nm
Intense has released the HPD Series 2400 of 1550nm laser diodes that are safe for the human eye. They have high peak power, and are ideal for distance measurement applications.
Intense has released the HPD6020 830nm high-power single emitter laser diodes. The HPD6020 are single-mode lasers with up to 200mW of output power at high beam quality.
Intense has released the HPD7404 laser driver system, designed for current control and temperature compensation of the company's high-power free space or fibered visible laser components.
Frankfurt Laser Co is distributing Askion's HQML3 CW Laser Diode Module, which is ideal for medical diagnostics, biotechnology, flow cytometry, microscopy spectroscopy, bio-fluorescence and general R&D
SensL's HRMTime is one of the first USB high-resolution timing modules on the market. With 27ps timing resolution, this flexible and high-performance module eliminates the need for multiple PCI cards.
Avago Technologies has introduced a new line of high-brightness red, amber, and orange LEDs for use in interior and exterior automotive and electronic signs and signals applications.
Honeywell Safety Products, formerly Sperian Protection, has announced its HSP Laser-Gard Barrier System for enclosing user's laser set-up on an optical table, significantly reducing the laser hazard
Sperian Protection has expanded its line of high transmission filters and now offers an HT Diode and YAG filter for its line of laser safety eyewear
Laser Physics UK has expanded its line of Sperian high-transmission filters to include an HT Diode and YAG filter for its line of laser safety eyewear
Cobolt, Swedish manufacturer of DPSS lasers, is showcasing a new family of nanosecond pulsed lasers and tunable mid-IR lasers
Newport Corporation has introduced the HXP1000 Hexapod, a high-load, six-axis parallel kinematic positioning system
Newport has introduced its HXP50 hexapod, a parallel kinematic motion device that provides 6-axis axis of motion: X, Y, Z, pitch, roll and yaw
Newport has launched a family of HybrYX motion stages that use both mechanical and air bearing technologies.
PicoQuant has launched a multichannel Picosecond Event Timer and Time-Correlated Single Photon Counting system (TCSPC) with USB interface.
PicoQuant has released the HydraHarp 400 Time-Correlated Single Photon Counting system under the GNU Linux operating system.
PicoQuant has introduced an extended version of HydraHarp 400, its multichannel picosecond event timer and time-correlated single photon counting system that can now accomodate up to eight independent input channels
PicoQuant has introduced an upgraded version of the multichannel picosecond event timer and Time-Correlated Single Photon Counting system (TCSPC), HydraHarp 400
Picoquant has released v1.2 of its software to support the HydraHarp 400 time-correlated single photon counting system
Hypertherm, a manufacturer of cutting systems, has announced the release of a 3kW fibre laser system - the HyIntensity Fiber Laser HFL030
Hypertherm has released two new HyIntensity fibre laser systems - the 2.0kW HFL020 and the 1.0kW HFL010, which join a 1.5kW version as fully-integrated fibre laser systems for cutting applications, including marking and fine-feature cutting
Hypertherm has released a new fibre laser cutting system that includes power source, cutting head, gas supply, operator interface consoles, motion controls, and software in one package
Telops has released a new version of its Hyper-Cam hyperspectral imager, with features to facilitate operation and data processing, including the integration of GPS and compass information
Headwall has released Hyperspec, a hyperspectral imaging system, which is available in the UK through Photonics and Analytical Marketing.
Headwall Photonics has announced the Hyperspec Extended visible and near-infrared (VNIR) spectrometer, a hyperspectral imaging instrument covering a broad spectral region from 600nm to 1600nm
Hyperspectral imaging provider Headwall Photonics has announced that its Hyperspec Recon allows for discrete target identification and hyperspectral scene rendering for reconnaissance applications at distances of 1.5km
Headwall Photonics has introduced its Hyperspec UV starter kit for evaluating and categorising the spectral composition of materials and samples within the UV spectral region
Pacer International has announced that it is now distributing a Hyperspectral Imager produced by Photon etc. The compact and portable imager can be used with a selection of cameras
Not listed? Click here