Browse products by name
Ibsen Photonics has launched its I-MON 256 OEM interrogation monitor for fibre Bragg grating sensing systems at 1,550nm
Ibsen Photonics has released release its I-MON 850 interrogation monitor for fast real-time monitoring of fibre Bragg grating sensors operating in the 850nm wavelength range
The i-trometer products are designed for meeting challenging spectroscopic requirements with wide dynamic range, great QE, high signal-to-noise ratio and yet low cost.
Toptica has launched the iBeam Smart PT, a compact, permanently fibre-coupled ('pigtailed') diode laser, designed for straightforward OEM integration
The iBeam smart WS, a compact OEM diode laser, features reliable wavelength stabilised laser diodes integrated into Toptica's successful iBeam smart platform
BFi Optilas, working alongside Precision Photonics, is announcing its capabilities to provide a MWIR coating for complex shapes like the inside of a domes and steep radius lenses at 3-5μm
iC-Haus has released its iC-GF monolithic interface, with two independent switching channels that enables digital sensors to drive peripheral elements, such as programmable logic controllers (PLC) and relays, for example.
iCHaus has launched a 1,024-step logarithmic precision potentiometer, the iC-HL, which can be used to set the optical output power of laser diodes in conjunction with APC laser drivers.
The new laser diode driver iC-HT, from iC-Haus GmbH, permits microcontroller-based activation of laser diodes in CW mode
iC-Haus has introduced its new iC212 optical receiver for measurements of fast laser diode pulses. The device operates across a wide range of input frequencies (up to 1.4GHz) and wavelengths
Andor Technology has launched its new iCam technology, a combined firmware and software innovation that will be incorporated into Andor's EMCCD imaging cameras, starting with the iXonEM and LucaEM product lines.
Andor Technology has launched its new iCam technology, a combined firmware and software innovation that will be incorporated into Andor’s EMCCD imaging cameras, starting with the iXonEM and LucaEM product lines.
The iCAP spectrometer provides excellent resolution, stability and sensitivity and excellent detection limits, which enable enhanced productivity, greater ease of operation and reduced cost of ownership.
Toptica Photonics has introduced its iChrome MLE, a compact multi-laser OEM light engine for multi-colour applications in biophotonics, allowing four different lasers can be selected to match the specific application
Lasermet has extended its range of Laser Interlock Systems to include two new systems - the ICS-10 and ICS-5.
Lasermet has introduced the ICS-6 ELISe, which is the company's Expandable Laser Interlock System to performance level E, featuring full start-to-end dual channel architecture and fault detection, which conforms to the latest standards EN ISO 13849-1 to p
IRphotonics, a manufacturer of infrared-based materials and systems, has introduced the iCure P200 power meter for thermal spot curing systems
Photonic Solutions is distributing the full range of id Quantique's high precision photon counting avalanche photodiodes (APDs), together with its id300 short-pulse laser source
ID Quantique has broadened the range of detector modules available in its successful id100 single-photon counter family to include two free-space versions and three fibre-coupled versions
id Quantique has announced a reduced noise level for its id201 single photon detection module at NIR wavelength
id Quantique has released a new firmware version v4.0 for the id201, offering new functionalities such as adjustable detection probability, adjustable dead time, and user-defined gate width
id Quantique, represented in the UK and Ireland by Photonic Solutions, has introduced the id201 single photon detection module at NIR wavelengths with reduced noise levels
ID Quantique has released its id210 advanced system for single photon detection at telecom wavelengths, i.e. 1,310nm and 1,550nm
ID Quantique has introduced its new time-to-digital converter, the id800-TDC. The id800-TDC is an eight-channel time-to-digital converter
ID Quantique is launching a new Time to Digital Converter (TDC) on the international market, the id800-TDC, which is an 8-channel TDC
Laser Components has added prototypes of Cal Sensors' IDA-series (IR detector assembly) to its product portfolio
JDSU has launched its Industrial Diode Laser (IDL) 200 Series systems and modules, which the company says will help end users and system integrators to improve the uptime of their instruments
Available through Photonic Solutions, JDSU has expanded the range of available lasers in its industrial diode laser (IDL) series with new diode lasers offering 100W of CW or pulsed output power at 915nm, 940nm and 965nm.
Ocean Optics has released the IDRaman mini handheld Raman spectrometer, a small, powerful instrument for sample authentication and counterfeit detection, identification and verification
Integrated System Technologies has released the new 210W three-channel iDrive 1000 LED driver. It incorporates patented Pulse Amplitude Modulation (PAM) drive technology and the ColourCool thermal management system.
Point Source has launched its iFLEX-Adder fibre-coupled laser beam combination system, able to combine up to five individual lasers in the range 400-640nm into one singlemode, polarisation-maintaining fibre
Point Source has released its iFLEX-Viper laser engine with new software control capability.
Elliot Scientific has become the exclusive UK distributor of iRphotonics' iGuide materials and systems for infrared applications
Ophir-Spiricon has launched the II-VI-CO2-58 Industrial Laser Beam Analyser.
Laser Lines has introduced the II-VI-CO2-58 industrial laser beam analyser from Ophir-Spiricon. The II-VI-CO2-58 is a laser beam profiling system that enables the quantitative measurement and viewing of high power CO2 beams.
Common faults in solar cells and panels can now be detected far more simply using two high-performance cameras from Andor Technology – the iKon-M 934 BR-DD and the LucaEM R.
Imagine Optic has introduced the ILAO (intense laser adaptive optics) deformable mirror, developed in conjunction with ISP Systems to respond to unmet needs in the domain of intense and ultra-high intensity
Compact handheld multifunctional illuminance meter for onsite measurement of lux or foot candles with a large illumination range. Absolute or difference measurements, battery or AC powered
Same as T-10 but with mini receptor probe (Ã˜16mm) to measure small or difficult to reach areas
In-line Illumination Telecentric Lenses offer long working distances and a port for a fibre illuminator, providing tools for difficult machine vision challenges that require accurate measurements of objects at varying distances
Photonic Instruments, a supplier of fluorescence excitation and laser ablation end user systems, has introduced OEM solutions based on its Mosaic Digital Illumination and MicroPoint Laser Illumination and Ablation product platforms
Jenoptik has introduced an Image J driver available for ProgRes microscope cameras.
The ImageIR range of thermography cameras from InfraTec is now supplied by Armstrong Optical
Hamamatsu has introduced a new member to its family of EM-CCD cameras. ImagEM is a universal camera for low-light fluorescence imaging, and ultra-low light luminescence imaging.
Hamamatsu has released its ImagEM Enhanced Camera, a back thinned, electron multiplier (EM) CCD camera and the latest addition to the Hamamatsu C9100 series.
Hamamatsu Photonics has released the ImagEM X2, an electron multiplying (EM) CCD camera with faster speed than previous ImagEM cameras
Until 31 December Flir Systems is offering a 50 per cent discount on an additional lens when buying its thermal imaging cameras
Till Photonics has released the iMIC 42. The four-camera solution, requiring only two cameras, is a complete microscope system for advanced fluorescence microscopy applications
Evatec has enhanced its capabilities for infrared thin film deposition, using either evaporative or sputtering technologies
Stil, inventor and manufacturer of the chromatic confocal distance sensor (CCS), has added a 'double frequency' function to the CCS Prima range of point sensors
French distributor BFi Optilas has announced improvements to its range of NIRQuest miniature NIR Spectrometers, featuring 20 per cent higher throughput, improved sensitivity and up to 3x better noise performance
Newport has introduced the standalone IMS-LM-SA Series of long-travel linear motor stages, based on a stiff-body design, and available in 800, 1000 and 1200mm travel
Spectral Imaging (Specim) has extended its ImSpector Enhanced series of imaging spectrographs with high-resolution imaging Raman spectrographs, combining high light throughput, distortion-free performance, and polarisation-free optical design
JDSU has introduced a laser architecture that offers high precision solutions for industrial and commercial applications. The Industrial Diode Laser System (IDL) provides up to 100W of power.
Industrialised laser modules for machine vision and image processing applications (Laser Components)
Laser Components has added the MVmicro sub-series of laser diode modules to its Flexpoint range, developed for standalone image processing tasks with output powers up to 100mW
Coherent has launched the IndyStar, a compact industrial excimer laser with a long tube lifetime providing increased reliability and lower overall cost of ownership for OEMs and end users.
Coherent has added the fully Semi S2-certified IndyStar 2kHz laser to its family of compact excimer lasers
Edmund Optics is now offering the Infiniprobe UV video microscopes, which feature a continuously focusable design as well as easy mounting to video cameras.
Edmund Optics has introduced its Infrared (IR) OD 4 Bandpass Filters, which provide the high transmission and deep rejection necessary to isolate narrow spectral regions for use in a wide variety of applications
Ulis, a leading infrared vision specialist making affordable uncooled thermal sensors for civilian and military applications, has introduced a compact, 640 x 480, 17µm infrared (IR) detector
Pacer Components has launched a high-power, miniature, surface mount infrared LED and phototransistor range, providing numerous application opportunities including industrial controls, portable and automotive electronics and non-contact position sensing.
Edmund Optics has begun to offer standard, off-the-shelf infrared optical components specifically tailored for use in the defence industry, available manufactured in a range of substrates
Deposition Sciences Inc. (DSI), a manufacturer of durable, thin film optical coatings, has released a line of thin film filters for imaging applications.
Photonic Science is offering InGaAs cameras for the standard spectral range (900 to 1700nm) with extension in the visible range (400nm) as well as infrared region (2200nm)
Judson has developed its InGaAs detectors so the standard J22 series is available with active areas from 40µm to 5mm.
Innolume has launched its semiconductor laser, the InnoComb, which emits tens to hundreds of pure, low-noise colours (comb spectrum) from a single laser cavity.
Pacer has announced that it is now distributing the innoRam portable Raman spectrometer, manufactured by B&WTek. The system features an integrated touch screen computer with research-grade performance
B&W Tek has introduced its innoRam portable Raman spectrometer system, featuring an integrated touch-screen computer with research grade performance
Trumpf has introduced its new TruLaser Cell 7040 laser system with disk laser, capable of optimal cutting and welding tasks using a single laser light cable
The Spectra-Physics brand of Newport has introduced its InSight DeepSee, a new ultrafast laser system for multiphoton imaging applications
Newport Corporation's Spectra-Physics Lasers Division has introduced its Inspire optical parametric oscillator, a tunable, ultrafast laser source for advanced imaging and spectroscopy applications
Newport Corporation's Spectra-Physics Lasers Division introduces the Inspire Optical Parametric Oscillator (OPO), a tunable, ultrafast laser source for advanced imaging and spectroscopy applications
Laser Components has announced the availability of two new IR emitters manufactured by InTex, the INT05-200 and INT20-1000
The Integral from Femtolasers is an ultrafast Ti:S oscillator. The improved low loss cavity provides power levels of greater than 400mW with pulse lengths shorter than 10fs in duration.
Elliot Scientific is distributing Femtolasers' newly updated turnkey Ti:S ultrafast oscillator - the Integral. An improved laser cavity increases the power levels to 400mW at low noise levels, compared to 150mW from the previous generation.
Laser maker Femotlasers' new ultrafast laser class Integral core offers what the company calls 'leading Ti:Sapphire technology' in a compact and robust package
Rofin has released the Integral laser, which provides 200W of laser power with sweet spot generation.
Rofin has introduced its Integral modal laser welding system for manual welding, featuring an updated 200W laser source
Avantes has announced the release of its new integrated spectrometer
Newport Corporation has introduced its Integrity VCS series vibration control system designed to provide an economical and stable platform for basic photonic research
Evatec is introducing what it describes as 'intelligent' coating systems, to enable demanding optical coatings to be produced reliably and at viable costs
Laser Optical Engineering has released its iNTELLILOCK system, which is tamperproof, low voltage, versatile and suitable for both laser and machine applications.
ESDI has launched a new vibration insensitive point-diffraction interferometer. The Intellium PDI is based on ESDI’s standard point-diffraction interferometer design, incorporating the patented HyperPhase module to replace the standard video camera.
Univet has released range of safety frames for use in intense pulsed light applications, which will be distributed by ES Technology.
Intense has introduced the Intense-HPD Series 6100 of 980nm high-power single emitter laser diodes. The 6100 Series are bright, single-mode lasers with up to 200mW of kink-free power.
Alrad has signed a UK distribution agreement to market Optometrics' range of interference filters and other optical components
Laser Components has introduced a new range of interference filters for flow cytometry, manufactured by Omega Optical, available in standard sizes to fit all research and clinical instruments
Laser Components now supplies 1-20um high efficiency infrared emitters (IRE) from Intex, capable of pulsing up to 100Hz
Laser Components now distributes the INTX08-0300 wideband infrared emitter manufactured by Intex. The 1-20µm high efficiency emitter is capable of pulsing at up to 200Hz
Following market studies, Renishaw has added extra features to its inVia Raman microscope, so providing faster, automated Raman spectroscopy.
Laser diodes module manufacturer ProPhotonix has announced the launch of its InViso Micro, an extension to its InViso laser diode module product line
Multipix is distributing the InViso Micro from ProPhotonix, designed for applications requiring extremely thin laser lines of just 15um at a working distance of 120mm
Lambda Photometrics are now distributing a new line of fibre-to-fibre optical isolators from Optics for Research, specifically designed for use in super-luminescent LED applications
Laser Components has announced that it now offers coatings produced via ion beam sputtering (IBS) on its range of optics
Laser Components has recently commissioned an ion beam sputtering (IBS) system in order to provide customers with a more complete range of coatings for laser optics
LaserOptik has introduced an ion beam sputtering (IBS) service, providing advanced coating technology that can satisfy critical demands on laser optics, such as complex filters or high power supermirrors.
Laservision has launched a range of safety spectacles that meet the mode-locked specification of European laser eyewear standard EN 207.
Marl has announced a new LED panel indicator lamp, sealed to IP68 for tough, wet and dirty environments including marine and industrial applications.
Southern Photonics has announced a new product for its Coherent Solutions range, its IQScope-30G for optical modulation analysis (OMA)
Deposition Sciences is now offering coatings that operate in the 3 to 5um and the 8 to 12um infrared (IR) spectral regions.
Laser Components is now offering its infrared (IR) conversion screens that come with 50 x 50mm and 30 x 30mm active areas with the LDT-1064C and LDT-1064CL models, respectively
Optek Technology has developed a comprehensive range of surface mount infrared LEDs, known as the OP180 Series and OP280 Series.
Edmund Optics has introduced a range of IR Neural Density Filters, which exhibit excellent linearity and are spectrally flat over a wide wavelength range of 2µm to 14µm
Edmund Optics (EO) has introduced IR Right Angle Prisms, which are used to achieve a 90º (Right Angle) light path bend
Dage-MTI has introduced a near-infrared (NIR) camera called IR-1000 for applications that require high sensitivity in the NIR wavelength range
Scitec Instruments has introduced a new 4W wire wound IR source suitable for use in laboratory or field instrumentation due to its long life and stable properties.
Newport's Spectra-Physics division has introduced the Iris OPO, a tunable, ultrafast laser source delivering gap-free UV to infrared femotosecond pulses for advanced imaging and spectroscopy applications
INO has released its 640 x 480 pixel thermal infrared camera module (IRXCore-640).
Pacer International is distributing the new Isobeam Fusion Collimator from LightPath to protect marking fibre lasers working at high peak power by suppressing back reflection and backscattering.
Deposition Sciences, manufacturer of thin film optical coatings, has announced an enhanced capability to apply highly specialised, durable coatings onto extremely complex shapes and multifaceted surfaces
Deposition Sciences (DSI) has developed the new IsoDyn LPCVD (low pressure chemical vapour deposition) process for applying durable coatings onto complex shapes and multifaceted substrates.
AMS Technologies has launched high power isolators from Oz Optics
Princeton Instruments has announced the availability of a new microscope interface designed for exclusive use with the company's recently introduced aberration-free IsoPlane imaging spectrograph
Deposition Sciences, Inc. (DSI), is now offering antireflection (AR) coated ball lenses for fibre optics, telecom and datacom applications.
Deposition Sciences has introduced a new range of durable, evenly-coated anti-reflection ball lenses in diameters from 200µm up to 10.0mm, created using the company’s IsoDyn LPCVD process
Instrument Systems has introduced the ISP 1000 integrating sphere, for testing high-power LED modules and SSL light sources
JPSA has introduced its ChromaDice solid state laser scribing system, which delivers high speed wafer scribing alongside an automated wafer handling system
J. P. Sercel Associates (JPSA) has introduced its IX Series of laser micromachining systems designed for use in high throughput compound semiconductor and LED device fabrication applications
IPG Photonics, a provider of fibre lasers and amplifiers, has announced the introduction of the IX-255 UV Laser Micromachining System
The new IX-4000 ChromAblate from J P Sercel Associates is an excimer laser workstation designed for medical device micromachining applications.
Andor Technology has launched the iXon Ultra high-performance EMCCD camera
Andor Technology has launched its iXon X3 range of high-performance EMCCD cameras, which it says represents the next generation of cameras within the iXon platform
Not listed? Click here