Browse products by company
Haas Laser Technologies
Haas Laser Technologies has introduced its TLC Objective optic for passively compensating for thermal lensing effects associated with high power collimators and focusing lenses
Hamamatsuâ€™s S8664-1010 silicon APD (avalanche photodiode) provides a large, 10 x 10mm active area and several other benefits that make it suitable for design into analytical instruments for low-light-level measurement.
Hamamatsu has introduced a new member to its family of EM-CCD cameras. ImagEM is a universal camera for low-light fluorescence imaging, and ultra-low light luminescence imaging.
Hamamatsu has released its ImagEM Enhanced Camera, a back thinned, electron multiplier (EM) CCD camera and the latest addition to the Hamamatsu C9100 series.
Hamamatsu Photonics has introduced a new streak camera series for UV to near-infrared measurements of extremely fast light phenomena
Hamamatsu Photonics has introduced two new lateral single mode type laser diodes to its range - the L11358 at 1,064nm and the LC0293 at 763nm
Hamamatsu Photonics has introduced its G10768-1024D InGaAs linear image sensors and the new C10854 multichannel detector head to measure foreign bodies in the near infrared range of 800nm to 1700nm
Hamamatsu Photonics has introduced the new multi-pixel photon counter (MPPC) S10362-11 series. The devices feature brand new technology using a Geiger-mode avalanche photodiode structure for ultra-low-level light detection.
Hamamatsu Photonics introduce the new S10200 TDI (time delay integration) sensor, featuring the latest high speed, high sensitivity, back-thinned CCD image sensors.
Hamamatsu Photonics has introduced the new G10447 series of 10 Gbps GaAs PIN photodiode receivers mounted in ROSA (receiver optical sub-assembly) packages.
Hamamatsu Photonics introduce the new multi-pixel photon counter (MPPC), the S10362-11 series. The device features brand new technology utilising a Geiger-mode avalanche photodiode structure for ultra-low-level light detection.
Hamamatsu Photonics has introduced the C10082CAH and C10083CAH spectrometers, and the new miniature, high-power UV fibre light source, the L10671.
Hamamatsu Photonics has released its one inch cube miniature spectrometer module, the RC series. These new miniature spectrometer modules are ideal for use in small, hand held sensor products and instruments.
Hamamatsu Photonics has released a compact VUV light source module.
Hamamatsu Photonics has released its miniature, high power UV fibre light source, also known as the S2D2.
Hamamatsu Photonics has expanded its range of semi-conductor detectors featuring photon detection capability with the introduction of the S10362-33 series multi-pixel photon counter (MPPC).
Hamamatsu Photonics offers the S10362 series of multi-pixel photon counters (MPPC) in both 1 x 1mm and 3 x 3mm active areas. These devices utilise brand new Geiger-mode avalanche photodiode technology for ultra-low-level light detection.
Hamamatsu Photonics has introduced a brand new hybrid photodetector module, the H10777.
Hamamatsu Photonics has released its 1-inch cube miniature spectrometer module, the RC series.
Hamamatsu Photonics has introduced the C10988MA, an ultra-compact spectrometer built using MOEMS technology. The C10988MA is a thumb-sized device developed for use in portable and hand-held devices
Hamamatsu has introduced a new range of very high power laser diode stacked bar arrays, capable of emitting at powers of 40W, 600W, 1.0kW, 5.0kW and 11.0kW
Hamamatsu Photonics, a manufacturer of innovative opto-electronic products, has introduced its Liquid Crystal on Silicon spatial light modulator (LCOS-SLM), the X10468
Hamamatsu Photonics has introduced the C10988MA, an ultra-compact spectrometer built using MOEMS technology
Hamamatsu Photonics will release its new Orca-D2 high-sensitivity camera for simultaneous dual wavelength imaging in early 2010
Hamamatsu Photonics LEPAS-12 Digital Optical Beam Acquisition and Analysis System is designed for optical beam measurements, featuring high sensitivity and high resolution.
Hamamatsu has introduced its S11105 series of ultra high-speed CMOS linear image sensors, capable of readouts at up to 50MHz
Hamamatsu Photonics has introduced a new series of super luminescent diodes, the L11342 series, featuring a radiant flux of 5mW at a peak wavelength of 680nm.
Hamamatsu Photonics has introduced its latest position sensitive detector (PSD) modules, the C10442 and C10443 series. The C10442 has three versions featuring either a 3mm, 6mm or 12mm linear PSD
Hamamatsu Photonics has introduced a new RC-LED, the L10881, to its range of high quality LEDs
Hamamatsu Photonics has released the ORCA-Flash4.0 V2, a four-megapixel scientific CMOS camera
Hamamatsu Photonics has released the ImagEM X2, an electron multiplying (EM) CCD camera with faster speed than previous ImagEM cameras
Hamamatsu Photonics has developed three new image sensors that feature a high-speed charge transfer structure in each pixel to enable high-precision time-of-flight distance measurements
Headwall Photonics has announced the Hyperspec Extended visible and near-infrared (VNIR) spectrometer, a hyperspectral imaging instrument covering a broad spectral region from 600nm to 1600nm
Headwall Photonics has announced the availability of new models of its Raman Explorer imaging instrument for use in the UV spectral region
Hyperspectral imaging provider Headwall Photonics has announced that its Hyperspec Recon allows for discrete target identification and hyperspectral scene rendering for reconnaissance applications at distances of 1.5km
Headwall Photonics has introduced its Hyperspec UV starter kit for evaluating and categorising the spectral composition of materials and samples within the UV spectral region
With high speed performance for both long travel and nanometre to micron range incremental moves, Nanomotion's motorised Z-Axis Auto Focus Stage provides a vertical positioning and focusing solution for automated microscope and imaging applications.
Nanomotion has released its FlexDC Motion Controller, which is a dedicated single or dual axis control and drive unit for use with Nanomotion's range of high performance ceramic servo motors and positioning stages.
Heason Technology has launched its OFXY range of open frame X-Y tables aimed at vision, optical and beamline system applications in metrology, quality inspection, and NDT.
Complementing and completing Nanomotion's range of ceramic motor driven miniature positioning stages, the new FBG series goniometer is available in four stack sizes
Heason Technology has launched the new AirGlide Ultra Precise Air Bearing System
Heraeus Noblelight has developed Heraeus Ignite Technology (HIT), a manufacturing process that helps to reduce the ignition voltage of arc and flash lamps, used in laser-based range finders and laser excitation
Heraeus Noblelight has introduced its new D2plus model deuterium-based light sources for analytical applications such as UV/visible spectrometry and HPLC or UHPLC
Heraeus Noblelight has launched NobleProbe, a measuring instrument specifically for UV LEDs. The device can be used to take precise measurements of irradiance in the near UV range
Heraeus Quarzglas has released Suprasil Standard Commercial Grade (CG), which is an inexpensive variety of high-quality synthetic quartz glass for standard UV optics
HGH has developed a new panoramic infrared vision system, VIGISCAN11. It has been designed for the surveillance of security perimeters, such as refineries, power plants, airports, and military bases.
HGH Infrared Systems
Infrared camera users normally have to choose between large area and high temperature sources for calibration of their sensors. Now, HGH Infrared Systems offers a single solution combining both requirements: the ECN100H series blackbodies.
HGH Systemes Infrarouges
HGH Systemes Infrarouges is launching a new compact high-temperature cavity blackbody. This small infrared reference source of 12.5mm diameter aperture goes up to temperatures of 600°C temperature.
High Q laser
High Q Laser has introduced the modelocked picosecond laser picoTrain Green IC-532-12000. It delivers synchronised and simultaneous output beams at 532nm and 1064nm.
High Q Laser has introduced the ultra compact femtoRegen UC OEM, a femtosecond regenerative amplifier that delivers 2W power at a 100kHz repetition rate with 400fs pulse duration.
High Q Laser introduces the ultra compact femtoRegen UC - an all-in-one femtosecond regenerative amplifier - delivering 2W power at 200kHz repetition rate with 350fs pulse duration on a footprint of 34 x 78cm.
High Q Laser has launched the ultra compact Femtoregen UC – an all-in-one femtosecond regenerative amplifier - delivering 2W power at 200kHz repetition rate with 350fs pulse duration on a footprint of 34 x 78cm.
High Q Laser has released a new femtosecond light source for multi-photon microscopy. FemtoTrain Imaging is a compact, all-in-one, diode-pumped, Ti:Sapphire oscillator.
High Q Laser has released a series of ultra compact pico- and femtosecond regenerative amplifiers picoRegen UC-Industrial and femtoRegen UC-Industrial, especially designed to meet industrial demands.
In partnership with APE, High Q Laser has introduced the picoEmerald, a turnkey, single-box, solid-state laser-based light source for coherent anti-Stokes Raman scattering (CARS) microscopy
High Q Laser has introduced its new PicoTrain high-power picosecond oscillators with wavelengths in UV, green and IR and output powers of up to 50W with high stability and reliability
High Q Laser has introduced its picoTrain range of picosecond oscillators with wavelengths in UV, green and IR, delivering output powers of up to 50W
High Q Laser has introduced femtoTrain Ti:Sapphire, a compact, all-in-one, all diode-pumped, Ti:Sapphire oscillator
High Q Laser has launched the picoRegen High-Energy, based on its picoRegen Science, a regenerative amplifier providing a maximum pulse energy of 3mJ and a pulse duration of 12ps
High Q Laser has introduced its latest generation of ultra-compact femtosecond and picosecond seed oscillators, the femtoTrain UC and picoTrain UC
High-power vertical diode laser stack arrays
Dilas has released a range of high-power vertical diode laser stack arrays. These devices are available in wavelength ranging from 630-1900nm with output power up to 100W CW per bar.
Highland Technology has released the T860, a multipurpose combination of a precision analogue comparator and a versatile output driver, capable of operating from DC up to 1GHz.
Highland Technology has introduced its PH200 single-channel benchtop nanowatt optical-to-electrical converter, the first product in its 'PH' range of extreme-performance photonic instruments
Highland Technology has announced the T240 single-channel externally-triggered complementary-output pulse generator for driving electrical/optical modulators
The T165 Laser Pulser incorporates an edge triggered pulse generator with 150ps nominal rise and fall times into a butterfly or TO-packaged laser
Hitachi Display Products Group
Hitachi Display Products Group has launched the TX14D14VM1BAB that brings VGA resolution and a 40,000 hour LED backlight to the existing range of compact 5.7 inch LCD TFT displays.
The Hitachi Display Products Group has launched the 17-inch SXGA TX43D57VC0CAA and the 17-inch WXGA TX43D55VM0BAA, which bring the performance of IPS-Pro to industrial LCD displays.
Hitachi Europe Display Products Group
Hitachi Europe Display Products Group (DPG) has released a compact 8.0-inch wide aspect ratio TFT display module. The TX20D19 supports a 15:9 wide aspect ratio, a display resolution of 800 x 480 pixels (WVGA) and delivers excellent optical performance.
Hitachi Europe, Display Products Group
Hitachi Europe, Display Products Group has released a high performance 5.0” VGA TFT display module the TX13D03VM1CAA.
The TM-1000 Tabletop Microscope from Hitachi High-Technologies is measurably kinder to the environment than the company's previous entry-level scanning electron microscope.
Hitachi High-Technologies has introduced new software for its popular TM-1000 tabletop microscope, adding the capability to produce, manipulate and record 3D visualisations of a specimen
Holo/Or has launched its new 8x8 Multi Spot diffractive optic for 2.94µm and 632.8nm light, offering high uniformity and high efficiency
Holo/Or innovation has improved the performance of its Homogenizer diffuser product line
Diffractive optical element company Holo/Or has announced further advances in the design and quality of its Vortex lens product line
Holoeye now offers a new series of standard diffractive optical elements (DOEs) with various patterns like dot arrays, dot-circles, circles and cross patterns.
Honeywell Safety Products
Honeywell Safety Products has introduced the Honeywell Rio laser safety eyewear, which combines safety with comfort, and is able to fit over prescription glasses or used standalone
Honeywell Safety Products, formerly Sperian Protection, has announced its HSP Laser-Gard Barrier System for enclosing user's laser set-up on an optical table, significantly reducing the laser hazard
Hood Technology, manufacturer of advanced stabilised imaging systems has announced the Alticam 11 EO/IR1 payload
Horiba Jobin Yvon has released an advanced thin film characterisation platform called DeltaPsi2. The software applies to ellipsometry, polarimetry and reflectometry and controls all Horiba Jobin Yvon thin film metrology instruments.
Horiba has released its MM-16 NIR spectroscopic ellipsometer, designed for thin film characterisation - determining thicknesses, optical constants (n,k) and the optical bandgap of materials, using wavelengths of 515-1000nm
NKT Photonics' supercontinuum SuperK Extreme line of white-light lasers has been incorporated into Horiba Instruments' fluorescence spectroscopy systems
Horiba Jobin Yvon
Horiba Jobin Yvon has launched its new series of combined Raman and FTIR microscope systems, which provide an expanded range of micro-analysis facilities upon the single benchtop instrument.
Horiba Jobin Yvon has introduced the LabRAM Raman/PL microscope configuration designed to provide everything needed for molecular characterisation of nanomaterials on one benchtop system.
Horiba Jobin Yvon has introduced the new Cathodoluminescence Universal Extension (Clue) upgrade for scanning electron microscopes. Clue provides high resolution spectral information with the spatial resolution of an electron probe.
Horiba Jobin Yvon has introduced three new ranges of multichannel detectors: the Symphony arrays with LN2 cooling, the Synapse arrays with thermoelectrical cooling, and the Sygnature ambient temperature linear detectors.
Horiba Jobin Yvon has introduced two new fast Raman scanning technologies: Swift and DuoScan. Swift provides per pixel measurement times as fast as 7ms. A 50,000-pixel spectrum image can be obtained in six minutes.
Horiba Jobin Yvon has released its XploRA microscope, which is part of the LabRAM family of Raman systems and is based on a research grade optical microscope offering all the standard imaging options such as polarisation, DIC and phase contrast.
Horiba Scientific has introduced the SPRi-Plex II surface plasmon resonance imaging system, with applications in label-free bioaffinity analysis adding high-throughput, real-time kinetic and affinity studies to biomolecule arrays
The XploRA Raman microscope, featuring Swift confocal Raman image operation, is now available from Horiba Scientific
Horiba Scientific has introduced QExtra Technology for back-illuminated deep depleted CCD detectors, an anti-reflective multilayer coating that is aimed at significantly improving the quantum efficiency over a broad spectral range
Huber+Suhner has added the SC-RJ product family to its portfolio of fibre optic assemblies. The fibre optic connectors are designed for harsh environmental and industrial applications
Hypertherm has released a new fibre laser cutting system that includes power source, cutting head, gas supply, operator interface consoles, motion controls, and software in one package
Hypertherm has released its MicroEDGE Pro CNC controller with the latest Phoenix Version 9 software. This model delivers customisable performance for a broad range of cutting applications
Manufacturer of advanced metal cutting systems Hypertherm has announced the launch of an expanded line of Centricut brand consumables for Kjellberg systems
Hypertherm has released two new HyIntensity fibre laser systems - the 2.0kW HFL020 and the 1.0kW HFL010, which join a 1.5kW version as fully-integrated fibre laser systems for cutting applications, including marking and fine-feature cutting
Hypertherm, a manufacturer of advanced cutting systems, has announced a number of feature enhancements to its ProNest nesting software
Hypertherm, a manufacturer of cutting systems, has announced the release of a 3kW fibre laser system - the HyIntensity Fiber Laser HFL030
Not listed? Click here