Browse products by company
Labsphere
Spectralon
With greater than 99 per cent reflectance, Labsphere's Spectralon laser pump reflectors provide a high level of diffusion efficiency for peak laser output power.
SC 6000
Labsphere has launched the SC 6000 - a programmable radiometer and photometer that measures luminous and radiant flux, luminance, radiance, intensity and irradiance.
Solar Spectrum Uniform Source
Labsphere has released a new product that allows users to generate a uniform radiance field simulating the spectral shape of solar light.
Labsphere USS-800 series
Labsphere has launched its USS-800 series of uniform source systems, available in continuous (USS-800C) or stepped (USS-800S) output models.
MtrX-SPEC
Labsphere has released its MtrX-SPEC light metrology software module, which delivers user friendly spectrometer calibration and control for spectral characterisation (flux, colour, intensity and irradiance).
FS2 Flashlight Measurement System
Labsphere has launched the FS2 Spectral Flux Measurement System, which carries out accurate spectroradiometric, photometric and colourimetric characterisation.
HalfMoon Total Forward Spectral Flux Measurement System
Labsphere and Otsuka Electronics have collaborated to develop a new light measurement system, known as the HalfMoon Total Forward Spectral Flux Measurement System, which has been designed for manufacturers of LEDs, light fixtures.
Lake Shore Cryotronics
Band pass filter
Lake Shore Cryotronics has introduced a new line of band pass and narrow band pass filters available with centre wavelengths from 15 to 200µm.
Far IR and THz Band Pass Filters
Lake Shore Cryotronics has expanded its filter products to include far infrared and THz applications.
BPF Series
Lake Shore Cryotronics has introduced its BPF Series of terahertz (THz) and infrared (IR) band pass filters
Lambda Photometric
E-761
Lambda Photometric is now distributing the E-761, a PCI-Bus nanopositioning controller, from Physik Instrumente (PI), suitable for high-tech applications in imaging, metrology, scanning microscopy and surface analysis.
Lambda Photometrics
P-611 series
Lambda Photometrics has introduced a range of piezo-driven translation stages from Physik Instrumente (PI). The new P-611 series offers five models of horizontal and vertical stages with one to three axes.
M-2x
Lambda Photometrics has introduced the M-2x series of high-precision, motorised linear actuators from PI. The actuators have been designed for applications requiring high resolution, high moving force and high speed.
Motorised translation stages
A range of motorised translation stages from Physik Instrumente (PI) is now available through Lambda Photometrics. The stages can be produced with different combinations of base profiles, motors and spindles.
UNO and SOLO 2
Lambda Photometrics has announced the latest additions to the Gentec-EO monitor family, with improved ergonomic design: the SOLO 2 and the UNO laser energy power meters.
SOLO 2 and UNO
The new SOLO 2 laser energy and power meter is more ergonomically shaped with a wide screen 2 times bigger than the SOLO-PE, and a transfer rate 20 times faster.
PISeca
The PISeca from Lambda Photometrics is a single-electrode position sensor that can determine distance, position and length values with sub-nanometer resolution.
Optical Backscatter Reflectometer 4400
With micrometer spatial resolution, an increased range up to 2km, sensitivity of -130dB, integrated distributed sensing capability and a compact design, Lambda Photometric's new OBR 4400 is perfect for optical time domain reflectometry.
NewView 7000-series
Zygo has announced its next-generation of 3D Optical Profilers, the NewView 7000-series. These products are designed for rapid, precise, and quantitative surface metrology for the production and scientific research markets.
PR 4400 Precision Reflectometer
Lambda Photometrics has released the PR 4400 Precision Reflectometer from Luna Technologies. This portable, user-friendly instrument mesasures reflections as a function of distance in a fibre component or assembly.
Phoenix 1400
Lambda Photometrics has launched the Phoenix 1400 C-band tunable laser, manufactured by Luna Technologies. The laser is based on Luna's compact external cavity microelectromechanical technology
IO-F-SL1 and IO-F-BB-SL2 fibre isolator
Lambda Photometrics are now distributing a new line of fibre-to-fibre optical isolators from Optics for Research, specifically designed for use in super-luminescent LED applications
Lambda Research
TracePro Bridge for SolidWorks
American software firm Lambda Research has recently introduced an optics design add-on for its mechanical design software SolidWorks, that allows designers to incorporate optical components with the SolidWorks environment.
TracePro 3.3.6
Lambda Research has announced the latest release of its illumination design software, TracePro 3.3.6, which is compatible with another new product, TracePro Bridge for SolidWorks.
OSLO 6.4
The 6.4 release of OSLO, from Lambda Research, features more than 40 additions and improvements, with the added capability to place multiple Interferogram (INT) files on any optical model surface.
OptiBelPro Module
Optimising an illumination system requires a way to automatically vary model parameters to achieve specific illumination distributions and the OptiBelPro module, from Lambda Research, enables such a process in TracePro.
TracePro Expert
Lambda Research has added a new fluorescence modelling capability to its TracePro Expert product. TracePro is a tool for modelling and analysing the propagation of light in opto-mechanical systems.
TracePro 4.0
TracePro 4.0 from Lambda Research delivers a number of new powerful capabilities addressing the optical design challenges in a variety of industry applications, such as fluorescence modelling.
Oslo version 6.4.3
The 6.4.3 release of Oslo from Lambda Research features 18 additions and improvements, including the ability to copy any Oslo plot or graphic to the MS Windows clipboard.
TracePro 5.0 optomechanical design software
Lambda Research has announced the release of TracePro 5.0, the latest version of its optomechanical design software, featuring a new interface for modelling optical sources
TracePro 6.0
Lambda Research has released version 6.0 of its TracePro software for modelling, developing and analysing optical systems.
TracePro 7.0
Lambda Research has released TracePro 7.0, the latest version of its optomechanical design software, which makes use of multi-threaded algorithms to accelerate raytracing on multi-core CPUs
TracePro 7.1
Lambda Research has released TracePro 7.1, the latest version of its illumination and optical analysis software, featuring new visualisation capabilities, new path-sorting, enhanced ray sorting and a new multicore thread setting
Oslo lens design software 6.6
Lambda Research has announced the latest release of its Oslo lens design software version 6.6
Lambda Research Corporation
TracePro 5.0
Lambda Research Corporation has launched TracePro 5.0, the latest release of its software for optical modelling, design and analysis.
Oslo 6.5 lens design software
Lambda Research Corporation has released version 6.5 of its Oslo lens design software. The Oslo 6.5 update includes 12 program enhancements and improvements to the 6.4 release
Laser 2000
LaserSource/TECSource
Laser 2000 is providing laser diode sources and the TEC controller series from Arroyo Instruments.
Slim
Laser 2000 is providing the Slim product line manufactured by Oxxius. This is a single longitudinal mode family of continuous-wave DPSS lasers with very small footprints.
FISH filter
Laser 2000 has released the new Fluorescence In Situ Hybridization (FISH) filter sets from Semrock. The FISH sets offer superb brightness, minimise crosstalk and are available in the full spectrum of colours.
TA-7600 semiconductor tapered amplifier
Laser 2000 has introduced the TA-7600 semiconductor tapered amplifier manufactured by New Focus. The TA-7600 is capable of faithfully amplifying tunable single-frequency light from various sources
Light engines
Laser 2000 has introduced a new line of 'light engines' designed to replace traditional light sources in optical instrumentation, in particular for bioanalytical applications, manufactured by Lumencor.
Solar Cell Scan
The Solar Cell Scan, from Gilden Photonics and available via distributor Laser 2000, allows researchers to measure quantum efficiency (QE) and incident photon to charge carrier efficiency (IPCE) for photon-to-charge converting equipment
WaveGauge digital wavefront sensors
Laser 2000 has announced the availability of the WaveGauge digital wavefront sensors, produced by PhaseView, for the characterisation of aspheric optics
PC-Plug Sensor
Laser 2000 has introduced the PC-Plug Sensor, from LaserPoint, which enables a PC or laptop to be used in conjunction with a sensor to create a full laser power meter instrument
A-LST-E series
The Laser 2000 A-LST-E series is the advanced T-LST series and it has the new advantage of an integrated rotation encoder
Laser 2000 UK
Semrock Razor-edge Raman filters
Available from Laser 2000 UK, Semrock Razor-edge Raman filters are now available with a transition width of <0.5 per cent.
Laser Components
3rd Milennium Filters
Laser Components has introduced 3rd Millennium filters, which combine patent-pending, hermetically-sealed assemblies with Omega Optical Alpha technology.. They offer superior spectral performance and longer filter life.
PDL-1315M/TM
Laser Components has released the PDL-1315M/TM transmitter module, constructed using a 1300nm Edge Emitting LED (ELED), coupling its optical output into single mode optical fibre.
Lead-salt laser diodes
Laser Components has a range of lead-salt (PbS/PbSe) laser diodes, which are ideal for probing of molecules using very narrow linewidth infrared light from 3333 to 400 wavenumbers.
Custom Fibre Assemblies
Custom fibre assemblies, from Laser Components, have extended the range of standard assemblies for telecommunications, with core sizes from 50µm diameter, and special cables for sensor and medical technologies.
PbSe lasers
Laser Components is offering PbSe lasers for high-resolution absorption spectroscopy. They have good tunability, and are ideal spectral sources for industrial or medical gas sensors.
Si APDs
Laser Components has introduced its Si APDs, which sit alongside its pulsed laser diodes at 850nm and 905nm, also produced in house. They have gained immediate acceptance in the market.
Wavepower
Laser Components has introduced Wavepower, an easy-to-use tool that can measure the wavelength and output power measurement of laser diodes and laser diode modules simultaneously.
Protective Windows
Laser Components is offering inexpensive protective windows, which can be used to protect high-quality optics against material splatter while cutting, welding, and engraving. They have a surface figure of 1L.
QuantaMAX
Laser Components is distributing Omega Optical’s latest microscopy filter sets. The QuantaMAX filter sets are manufactured using energetic process refractory ocide coating technology.
Top hat beam shaper
Laser Components has launched Holo-Or's new range of top hat beam-shapers designed for a 2940m laser with a 4.0mm Gaussian beam.
Nanostack pulsed laser diodes
The variety of pulsed laser diodes (PLDs) manufactured by Laser Components has increased to meet numerous market demands. Its Nanostack laser technology at 905nm now includes several epitaxially integrated emitters.
DPM modules
Laser Components is selling DPM modules (diode-pumped microchip), a combination of laser rod and frequency-doubling crystal, using 0.5mm thick Nd:YVO4 and Nd:GdVO4 crystals function joined to 2mm thick KTP doubling crystals.
Crystals
Laser Components is distributing Nd:GdVO4 crystals without a laser source. It is an excellent laser crystal for diode-pumped lasers, exhibiting a high gain, low threshold and high absorption coefficients at pumping wavelengths.
UV, Visible and IR detectors
Laser Components offers a wide range of detectors from UV (SiC, silicon UV enhanced), visible (Si photodiodes, APDs, position sensitive detectors (PSD) and colour sensors), and infrared
Photline PS-LN
The new Photline PS-LN Polarisation Rotators from Laser Components are integrated optics waveguide devices that switch the polarisation state of an input light between two linear orthogonal output states at frequencies up to 10GHz.
FlexPoint FP-HOM
Laser Components is providing the Flexpoint FP-HOM line lasers from Blau Optoelektronik. The FP-HOM homogenous series line lasers are available with a broadband light source, using 680nm super luminescent diodes (SLDs) with reduced speckle pattern.
Sarf series
Laser Components is providing the new Sarf series of Si-APDs for rangefinding systems based on the time-of-flight method (LIDAR).
Femto current amplifier with 400MHz bandwidth
Laser Components has added the HCA-400M-5K-C model of current amplifier to its HCA series of fast current amplifiers from Femto.
InGaAs detectors from Judson
Judson has developed its InGaAs detectors so the standard J22 series is available with active areas from 40µm to 5mm.
Fibre Optic Hermetic Feedthroughs
Sedi Fibres Optiques offers comprehensive solutions for fibre optic hermetic feedthroughs. Standard feedthroughs include connectors, such as FC for singlemode or graded index fibres, and SMA for large core fibres from 140µm to 1000µm.
Top-Hat with Improved Uniformity
HoloOr has launched an enhanced Top-Hat beam-shaper with improved uniformity.
Anti-reflection coatings range
Laser Components has launched a range of anti-reflection (AR) coatings to help bring down the losses associated with back reflections within optical systems.
Dual FOV IR Camera Lenses
Wavelength Technology has developed a range of infrared dual focus IR camera lenses. This wide band IR lens (8µm to12µm) has been developed to cater for cameras with zoom functionality.
LC LMD series
Laser Components has introduced the low cost LC LMD series of laser diode modules for the OEM market
MIRA4
Cal Sensors has released the MIRA4 mid-infrared array in a quadrant format that includes four 1mm square PbSe detectors mounted in a single substrate. The detectors are available from Laser Components.
SiTek 1LA16-2.5_SU89 PSD Array
Laser Components has introduced the SiTek 1LA16-2.5_SU89, a PSD array with 16 parallel 1-dimensional PSDs placed on the same chip
SC-LIA-S multi-channel lock-in amplifier
UK-based distributor Laser Components has introduced a new lock-in amplifier from German manufacturer Femto Messtechnik, a standard 19-inch rack system with options including 50-120Hz frequency range and 5-10kHz working frequency
Pireplus high output infrared emitter
Laser Components has begun distributing the Pireplus high output infrared emitter manufactured by Cal Sensors, featuring integrated drive electronics
Interference filters for flow cytometry
Laser Components has introduced a new range of interference filters for flow cytometry, manufactured by Omega Optical, available in standard sizes to fit all research and clinical instruments
AML-53041XX-01 green laser diode
Laser Components have recently added the AML-53041XX-01 green laser diode module to their low cost line of OEM diode laser modules
IDA-series IR detector assembly
Laser Components has added prototypes of Cal Sensors' IDA-series (IR detector assembly) to its product portfolio
Ruled polarisers from Optometrics
Laser Components has introduced ruled polarisers from Optometrics. Using three ruling engines in a controlled environment, Optometrics can rule polarisers with groove spacings of up to 1,200 grooves per millimetre
BBK Bending Units
Laser Components has introduced BBK bending units, which offer a robust and distortion-free housing for bending mirrors
NIR-MPX800 series
Laser Components has introduced the NIR-MPX800 series, which complements the family of phase modulators from Photline
K41 and CS405 series of laser diodes
Laser Components has released the K41 and CS405 series of fibre-coupled high-power laser diodes. At 405nm, output power from the fibre varies from 20mW to 100mW
Top-hat designs
Laser Components has released stable top-hat designs combining the uniformity of top-hat designs with the flexibility of diffusers
Wavepower
Laser Components has introduced Wavepower, an instrument that provides an easy way of determining both wavelength and output power of low power lasers
LuxxMaster Raman source
Laser Components has introduced the LuxxMaster Raman source for use in medical technology, industrial, and military applications
Count Photon Counters
Laser Components has introduced its range of Count photon counters, which achieve quantum efficiency of more than 70 per cent in the red region
Flexpoint Mini series
Laser Components has released the Flexpoint Mini series of laser diode modules. The laser diode incorporates a variable lens that can be adjusted to focus or collimate the emitted laser beam
SemiNex laser diodes
Laser Components will distribute long-wavelength high-power laser diodes from SemiNex, operating at 14xx and 15xx wavelengths
Flexpoint Mini laser diode module
The Flexpoint laser diode module, Mini series, from Laser Components, differentiates itself from other compact modules in both the equality of performance and versatility
LUCI-10 USB control interface
Laser Components' LUCI-10 USB control Interface allows remote control of Femto amplifiers and photoreceivers from a standard Windows PC
Beam delivery systems and infrared optics
Laser Components has introduced a wide range of beam delivery systems, to supplement its existing range of infrared optics for CO2 lasers
XC frame safety glasses
Laser Components has introduced its XC frame for laser safety glasses, which meet Vo ballistic tests for impact, and are therefore suitable for military use
INT05-200 and INT20-10 IR emitters
Laser Components has announced the availability of two new IR emitters manufactured by InTex, the INT05-200 and INT20-1000
Low-noise lock-in amplifier
Distributor Laser Components has introduced a low-noise lock-in amplifier manufactured by Femto Messtechnik, featuring a Eurocard 19-inch plug-in board design
Holographic wire grid polarisers
Laser Components has announced the availability of a range of holographic wire grid polarisers from Optometrics USA
LC-LMD-650-12 low cost laser module
Laser Components has introduced a new addition to its family of low cost laser modules. The LC-LMD-650-12 is a 650nm laser diode module available in either 1mW or 5mW options
Filters for fluorescence imaging
Laser Components has introduced a new range of hard-coated filters for fluorescence imaging, available as a set including excitation, emission and dichroic filters, or supplied separately
Industrialised laser modules for machine vision and image processing applications
Laser Components has added the MVmicro sub-series of laser diode modules to its Flexpoint range, developed for standalone image processing tasks with output powers up to 100mW
Flexpoint MV Focus
The Flexpoint MV Focus, available from Laser Components, is a line laser with a homogenous power distribution that can be focused precisely without the use of any tools
Ion beam sputtered coatings
Laser Components has announced that it now offers coatings produced via ion beam sputtering (IBS) on its range of optics
AR coatings for fibre optics
Laser Components has announced that its fibre optics customers are now able to benefit from anti-reflection coatings on fibres.
JEC1.6l SiC UV photodiode
Laser Components has launched its JEC1.6l silicon carbide (SiC) UV photodiode, offering a peak signal increase of 50 per cent compared to the company's older JEC1 UV photodiode
OT-4040 portable laser alignment system
Laser Components has introduced its OT-4040 portable laser alignment system for the precise alignment of mechanical structures across distances of up to 300 feet
Gold diffraction gratings
Laser Components now offers a range of gold diffraction gratings, manufactured by Optometrics Corporation, which it says are particularly well suited to use with IR lasers
MediStrip fibre strippers
Laser Components has introduced a fibre stripping tool specifically designed with medical applications in mind, capable of stripping the buffer off all common diameters of optical fibre
A range of safety products
Laser Components offers a wide range of products for laser safety, including eye-wear, curtains, screens, converter cards and IR viewers
BWT laser diode modules
Laser Components now distributes a line of high power laser diode modules manufactured by BWT Beijing. The wavelength-stabilised laser offers 25W output at a wavelength of 976nm (<0.5nm FWHM, 0.02nm/C) from a 47 x 40 x 20mm form factor
Thin film polarisers for high power densities
Laser Components has introduced a range of four types of thin film polarisers based on glass substrates, which it says are ideal for use in high power density applications
LT-VA-5 alignment system
Laser Components has introduced its LT-VA-5 alignment system for use in various industrial alignment applications
Holo-Or elliptical diffusers for excimer lasers
Laser Components has launched a new range of elliptical diffusers for excimer lasers, which transform an elliptical excimer beam to a uniform round spot, manufactured by Holo-Or (Rehovoth, Israel)
Quick Power Meter
Laser Components has introduced its Quick Power Meter (QPM) product line for laser power measurements, including six models covering the 2W to 10kW power range
Grazing incidence gratings for dye lasers
Laser Components now offer a range of grazing incidence gratings manufactured by Optometrics, suitable for use in dye laser systems
Red-wavelength laser using VBG
Laser Components, distributor for PD-LD, has introduced a solid-state alternative to the HeNe using Volume Bragg Grating (VBG) technology
Pyreos NDIR thin film pyroelectric detectors
Laser Components now distributes a line of NDIR thin film pyroelectric detectors produced by Pyreos, enabling new levels of sub-ppm detection of gasses and pollutants
High brightness pump lasers
Laser Components has introduced its new 808nm laser diodes for pumping applications, supplying 10W of CW output power from a 200µm single chip emitter in a standard C-mount package
SemiNex high power multi-chip diode modules
Laser Components has started distributing the SemiNex range of high power multi-chip laser diode modules, manufactured by SemiNex, offering up to 20W CW optical power
Miniature high-voltage digital bias control modules
Laser Components has introduced a range of miniature high-voltage digital bias control (dBC) modules, well suited to controlling avalanche photodiodes and fast PIN photodiodes.
SiTek position sensing detectors
Laser Components now distributes a range of position sensing detectors from SiTek, available with an evaluation board to simplify the work of position measurement
Protective coatings and buffers for optical fibres
Laser Components has introduced a range of protective coatings and buffers for optical fibres, which it says extend the lifetimes of the components
Optical fibre switches
Laser Components has introduced a range of optical fibre switches designed for various laser measurement and microscopy applications
Filters for flow cytometry
Laser Components has introduced a range of filters for flow cytometry, available in standard sizes
Laser safety barriers and curtains
Laser Components can now offer a wide range of barriers and curtains to shield large areas from laser radiation, covering wavelengths of 180-11,000nm and low, medium and high power applications
CountBlue
Laser Components has expanded its Count series of single photon counting modules to include the new CountBlue devices
Mounts for laser optics
Laser Components has introduced a new range of opto-mechanical benches and mounts for laser optics
Flexpoint pattern projection DOEs
Laser Components now distributes a range of pattern projection diffractive optical elements (DOEs) manufactured by Flexpoint, for use in any Flexpoint low power laser module
High-power PLDs at 905 and 1550nm
Laser Components has introduced a new range of high-power pulsed laser diodes (PLDs), produced at its Canadian facility, including single emitters, multi-junction PLDs, and stacked designs at 905 and 1,550nm
Flexpoint LT
Laser Components has introduced the Flexpoint LT series of laser modules featuring a housing from which the laser beam exits parallel to the axis of rotation of the housing
Firecomms' OptoLock optical transceivers
Laser Components has added Firecomms' OptoLock optical transceivers to its product portfolio. The IDL301T-220 uses a plastic optical fibre (POF) and offers hardened immunity to EMI/EMC interference, as well as excellent ESD performance
Laser protection windows
Laser Components now offer a range of laser protection windows, for a variety of materials and AR coatings for the wavelength required
Single- and multichannel lead salt IR detectors
Laser Components now distributes two new families of single- and multichannel lead salt infrared detectors manufactured by Cal Sensors Inc (CSI), as well as a new digital drive board
MX2000-LN and MPX2000-LN lithium niobate modulators
Laser Components now distributes the MX2000-LN and MPX2000-LN series of optical modulators produced by Photline Technologies
4W fibre-coupled diode lasers
Laser Components has begun distributing a range of four-pin fibre-coupled diode lasers manufactured by SemiNex emitting up to 4W CW at 1,450, 1,470, 1,532, or 1,550nm
INTX08-0300 wideband infrared emitter
Laser Components now distributes the INTX08-0300 wideband infrared emitter manufactured by Intex. The 1-20µm high efficiency emitter is capable of pulsing at up to 200Hz
TO laser diodes with integrated drivers
Laser Components has introduced a range of laser diodes featuring a driver circuit integrated inside the TO can
Ion beam sputtered coatings for laser optics
Laser Components has recently commissioned an ion beam sputtering (IBS) system in order to provide customers with a more complete range of coatings for laser optics
SAP500 linear or Gieger mode APDs
Laser Components has launched a new silicon avalanche photodiode for linear and Geiger mode operation, featuring excellent quantum efficiency, extremely low noise, and minimal dark current
Intex infrared emitters
Laser Components now supplies 1-20um high efficiency infrared emitters (IRE) from Intex, capable of pulsing up to 100Hz
ST60 thermopile detector
Laser Components has released the ST60 high temperature silicon-based thermopile detector
Fibercheck
Laser Components has introduced its Fibercheck device for testing the condition of optical fibres by simply coupling a good visible laser light into the fibre to be checked
Metal bending mirrors
Laser Components has begun offering a series of mirrors in which the reflecting face is at exactly 45° to the base, to a precision of 1 arc minute
Polymer lenses for laser safety
Laser Components has introduced a new generation of polymer filters for laser safety eyewear offering protection levels of L6 for CW and L8 for pulsed lasers at 1,064 and 532nm
Ball mounted hollow retroreflectors
Laser Components is now offering ball-mounted hollow retroreflectors from PLX for laser tracker targets. These instruments measure distances and coordinates
SemiNex Corporation laser diodes
Laser Components is distributing laser diodes in the 1,300nm to 1,700nm wavelength range from SemiNex Corporation
High-power cables
Laser Components now offers high-power cables with connectors and copper ferrules. The use of copper as a ferrule material guarantees optimal heat removal
LDP-CW 20-50 OEM
Laser Components now distributes the LDP-CW 20-50 OEM from PicoLas, an affordable, compact and efficient power supply for laser diodes of output power up to 1kW
HI Series and HI HIHI-FAC Series pulsed laser diodes
Laser Components has introduced its HI -Series and HI HIHI-FAC Series pulsed laser diodes at 1,550nm for applications in rangefinder systems
ModBoxTTX
Available from Laser Components, the ModBoxTTX from Photline Technologies is a benchtop tunable laser source designed for laboratory and production use
Ultra Stable Hard Mounted Hollow Retroreflector
The Ultra Stable Hard Mounted Hollow Retroreflector (USHM), from Laser Components, is a self-compensating mirror that is totally insensitive to position and movement, such as tilt and rotation
LSC-035 driver circuit for laser diodes
Laser Components has introduced its new LSC-035 driver circuit for laser diodes. The inexpensive unit was developed for n-type CW laser diodes with a maximum operating current of 300mA
Flexpoint laser diode modules
In response to the increasing choice of Flexpoint laser diode modules, Laser Components has changed the part code nomenclature for the dot and line lasers
Quadrant photodiode JQC5R
Laser Components has introduced the quadrant photodiode JQC5R, a monolithic component for high resolution position measurements and tracking applications, within in the 215-260nm spectrum
PDI-C172SMF
The PDI-C172SMF is a blue enhanced PIN silicon photodiode from Laser Components that is ideal for high speed photoconductive or photovoltaic applications packaged in a black plastic surface mount package
Hard coated laser line long pass filters
Laser Components now offers a range of Optometrics' hard-coated laser line long pass filters that use its Quasar technology to deliver a transmission of >90 per cent with deep OD6 blocking
Count
Laser Components' Count blue series achieves a quantum efficiency of 60 per cent in the blue spectral range, which the company claims has never been done before
LCA-Mini series
Laser Components has introduced Femto's new LCA-Mini series current amplifier range, designed for the OEM market as an off-the-shelf unit
WinSPF software V4.1
Laser Components has released V4.1 of its WinSPF software for the SPF-290S sunscreen protection factor analyser
Flexpoint MVpico series
The Flexpoint MVpico series is Laser Components smallest line laser that is used in industrial image processing
Compact laser system
Through its partner SemiNex, Laser Components has introduced a 25W CW compact laser system based on the former's high power laser diodes
Flexpoint MV laser modules
Laser Components has introduced the Flexpoint MVmicro and MVpico series of line lasers for image processing
AR coating
Laser Components has introduced enhanced AR coatings designed for use on optical fibres, which reduce coatings reflections by nearly 3 per cent at the glass/air interface
LabSource
Laser Components is pleased to introduce the LabSource series of bench top laser sources manufactured by PD-LD Inc with Volume Bragg Grating stabilised laser diodes
Low Cost Laser Module Dot series
Laser Components' Low Cost Laser Module Dot (LC-LMD) series offer competitive, inexpensive and one of the smallest designs available worldwide
H0
Laser Components has unveiled its H0 series of photodiodes receivers that are supplied in a compact, modified TO5 housing with a diameter of about 5mm
ModBox-1550nm-44Gbps-NRZ
Laser Components is now offering the ModBox-1550nm-44Gbps-NRZ, an optical modulation unit that generates high performance NRZ optical data streams
Rio
Laser Components is now offering its Rio laser safety eyewear that is available EN 207:2009 certified for use with ps and fs Nd:YAG and Ti:Sapphire lasers up to 1.5 J/cm² (M LB 8)
coatings
Laser Components is now offering near IR coatings using its new sputter coating process
IR conversion screens
Laser Components is now offering its infrared (IR) conversion screens that come with 50 x 50mm and 30 x 30mm active areas with the LDT-1064C and LDT-1064CL models, respectively
Avalanche photodiodes
Ultraviolet enhanced avalanche photodiodes (APD) have been developed by Laser Components
1350nm laser source
Laser Components has introduced the SemiNex high power 1350nm laser products, available in raw bars, chips, sub-mounts and fibre-coupled packages
SUR-Series APDs
Laser Components has introduced the SUR-Series of UV-enhanced avalanche photodiodes (APDs), which have a reach through structure, allowing low noise and sensitivity in the blue and UV wavelength range
LCA-B Series
Laser Components is distributing Femto Messetechnik's LCA-B Series, an ultra-low noise and low cost current amplifier, which is ideal for OEM applications
UV Gain Flattening Filter
Laser Components is distributing the UV Gain Flattening Filter from Omega Optical
Multi-zone filters
Laser Components has announced the availability of multi-zone filters on a single substrate. Its newly enhanced capabilities enable the company to provide both robust multi-filter assemblies and multi-zone filters patterned using photo-lithography
MV series
Laser Components is promoting its selection of products from its series of machine vision lasers, the MV series
SUR500
Laser Components has announced its new detector, the SUR500, which was developed specifically for biomedical applications in which the smallest signals in the short-wave ultraviolet, blue spectral range have to be detected
goggles
Laser Components is offering a large range of safety goggles that focus on protection, comfort and style for alignment application users, using lasers from HeNe to diode and excimer
Positioning sensor detectors
An essential requirement when keeping lasers positioned correctly is the use of a sensor that can record the beam position to sub-micron accuracy without interfering with the direction of the beam
Screens
Laser Components is now offering a range of laser light conversion screens, covering power levels from the UV to NIR
ModBox-850nm-28Gbps-NRZ
The ModBox-850nm-28Gbps-NRZ from Photline Technologies is an optical reference transmitter designed for testing 100GbE systems and components
FP-LR-635
Laser Components introduces the FP-LR-635 series to its product portfolio – laser modules for long distance applications, starting at 10-metre range
Omega Optical UV filters
Laser Components are now supplying new UV optical filters from Omega Optical. Using a new sputter coating tool, these filters can achieve more than 80 per cent transmission
LC LMD Series
Laser Components is promoting what it says are the smallest laser modules available worldwide, available from stock in several wavelengths
Flexpoint
Laser Components now offers all Flexpoint dot and line lasers with the option of 19mm housings. Dot lasers are 63mm long, and line lasers are 77mm long.
POL-15 polariser
Laser Components' laser beam polariser is an adjustable rotation mount
SiTek
Laser Components is now offering the SiTek range of two-dimensional position sensing detectors (PSDs), which give ±0.3 per cent typical non-linearity accuracy readings over areas up to 45 x 45mm
LML-530-GB by PD-LD
Laser Components has introduced a stabilised, 530nm single-mode laser module, LML-530-GB, as the newest product in PD-LD's portfolio of laser diodes for spectroscopic, biomedical and process control systems
Count NIR/Count Q
Laser Components has announced it is distributing two new single-photon counting modules: Count NIR and Count Q, both optimised for longer wavelengths
LDP-QCW 300-12
The LDP-QCW 300-12 is a compact and efficient current supply to drive quasi continuous wave laser diodes
Laser Diode
CVLM57 multi-junction 1550nm laser diode
Laser Diode has developed the first ever multi-junction 1550nm laser diode, incorporating three epitaxially grown junctions in a single chip
Laser Lines
M2-200S Beam Propagation Analyzer upgrade
Available through Laser Lines, Ophir-Spiricon has released an upgraded and reduced size version of its 200S Beam Propagation Analyzer.
BA150 Industrial Laser BeamAnalyzer
Available through Laser Lines, Ophir-Spiricon's BA150 Industrial Laser BeamAnalyzer is a laser beam profiling system that analyses key laser parameters in order to maintain peak performance of precision material processing lasers.
II-VI-CO2-58 laser beam analyser
Laser Lines has introduced the II-VI-CO2-58 industrial laser beam analyser from Ophir-Spiricon. The II-VI-CO2-58 is a laser beam profiling system that enables the quantitative measurement and viewing of high power CO2 beams.
DS20HE-1064 Series laser
Photonics Industries International has increased the power and pulse repetition rate of it DS Series diode pumped solid state lasers to 30W at 300kHz at 1,064nm.
Laser marking equipment
Synrad has released its Firestar t100 laser, FH Flyer marking head, and WinMark Pro laser marking software.
WaveStar spectrometer
Ophir has released its WaveStar spectrometer, which improves the level of accuracy and ease in spectral measurements.
USB L11058 Laser Beam Profiling System
Spiricon has released the USB L11058 Large Format Beam Profiling Camera.
DP10 Pulse Diode Pumped Laser
Photonics Industries International has released a line of pulsed diode pumped lasers.
LIEKKI fibre laser optical engines
nLight has launched a range of LIEKKI fibre laser optical engines, which are plug-and-play laser modules for output powers from 10 to 100W average output power.
LIEKKI ytterbium fibres
nLight has released a Ytterbium fibre product series known as LIEKKI Yb1200, which offers extremely high dopant concentrations resulting in short application lengths.
Pearl high brightness modules
nLIGHT has released Pearl high-brightness modules, which are available at 915, 938, 976, and 980nm for pumping either erbium-based or ytterbium-based fibre lasers.
Expanded Pearl range of solid-state lasers
Laser Lines is distributing nLight's Pearl range of solid-state lasers, which has recently been expanded into the 879 and 888nm wavelengths
Cobolt Jive
Cobolt, a Swedish manufacturer of low-noise DPSS lasers, has released a higher power model of its Jive 561nm solid-state laser.
Cobolt Fandango
Cobolt, a Swedish manufacturer of low-noise DPSS lasers, has released a higher power model of its Fandango 515nm solid-state laser, available from Laser Lines.
Pearl diode lasers
nLight Pearl fibre-coupled diode lasers, available from Laser Lines, produce up to 100W of 976nm light from a 105µm core fibre at an excitation numerical aperture of 0.12
Samba DPSS laser
Laser Lines has introduced the Samba single-frequency and ultra-low noise CW DPSS laser, produced by Swedish manufacturer Cobolt, capable of generating up to 1W CW output power at 532nm
Titan Infinity Series
Laser Lines has introduced the Titan Infinity Series from DPSS Lasers Inc - a true CW DPSS UV high-power solid-state laser
UBQ-7810 ultra-compact fibre laser
UK-based distributor Laser Lines has announced the availability of the UBQ-7810 ultra-compact fibre laser designed by Ubiquilight and manufactured by Laser Lines' partner Diode Laser Concepts
Cobolt Dual Combiner
UK distributor Laser Lines has announced the release of a modulated dual line light engine from Cobolt that is optimised for high-end Optogenetics research applications
FiberCut
Laser Mechanisms' new FiberCut laser processing head is now on offer from UK distributor Laser Lines
Cobolt 04-01 Series
Laser Lines has released a true fibre pigtailed option for the Cobolt 04-01 Series of single longitudinal mode lasers
DSH Series laser
Photonics Industries International has extended its Nd:YVO4 based DSH Series laser offering to include 50W of green and 30W of UV average power in a commercially available diode pumped solid state laser
Arex
UK distributor Laser Lines has introduced the Arex, an ultra-compact fibre laser from Datalogic, which is ideal for marking applications
Flamenco 660nm
UK distributor Laser Lines has released a higher power model of the Cobolt Flamenco 600nm
Beamage 3.0
Laser Lines has announced the launch by supplier Gentec E-O of the Beamage 3.0, which it describes as the first USB 3.0 camera dedicated to laser beam profiling
Laser Machining Technologies
Diamond Series
Laser Machining Technologies has unveiled its Diamond Series micro-machining laser
Laser Operations
Ultra-G green laser platform
Laser Operations has introduced its Ultra-G green laser platform, a new visible laser product family based on its BrightLock monolithic chip wavelength stabilisation technology
QPC Lasers 1908nm fibre-coupled diode laser
Laser Operations has introduced a new high power fibre-coupled diode laser as part of its QPC Lasers product line, offering 1,908nm and output powers of up to 40W CW
laser diode
This month, laser diode manufacturer Laser Operations has appointed Soliton as a non-exclusive distributor for Germany, Austria, German-speaking Switzerland and Poland, and Indeco as the non-exclusive distributor for Japan
Laser Optical Engineering
Intelligent Interlock Systems
Laser Optical Engineering has released its iNTELLILOCK system, which is tamperproof, low voltage, versatile and suitable for both laser and machine applications.
Laser Physics
Stellar-Pro-L
Available through Laser Physics, Modu-Laser has added the 300mW multiline laser to its range of air-cooled argon lasers. Using its single package design, the Stellar-Pro-L gives polarised TEM00 output.
Laser safety products
Laser Physics have introduced three new products to improve laser safety: laser safety eyewear, an interlock system, and a software suite to assist calculations associated with laser safety standards.
FizCam 3000
Laser Physics has launched the FizCam 3000 from 4D Technology, a Fizeau interferometer developed for accurate measurement of meter-class optics and general optical elements.
Compact Handheld Laser Power/Energy Meter
Scientech has released a line of calorimeter laser measurement systems using its new intelligent detector technology.
Kentek Table Guard Barrier System
Laser Physics, a UK distributor for laboratory laser safety solutions, has begun distributing the Kentek Table Guard Barrier System, a new optical bench laser safety system, to customers in Europe
Laser Physics UK
Compact OEM 10Amp Laser Diode Driver
Laser Physics UK has released the PLD10K-CH 10 Amp Laser Diode Driver, expanding its Wavelength Electronics PLD series of laser diode drivers.
PAXit! and PAXcam
MIS has released the PAXcam family of scientific-grade digital microscope cameras and PAXit! image management, reporting, and measurement software.
HT diode and YAG filters for Sperian eyewear
Laser Physics UK has expanded its line of Sperian high-transmission filters to include an HT Diode and YAG filter for its line of laser safety eyewear
PLD-CH driver series
Wavelength Electronics, available from Laser Physics UK, has added a 12.5A model to the PLD-CH driver series
Photomultiplier Detection System
The Meadowlark Optics Photomultiplier Detection System, available from Laser Physics UK, boasts a low noise, high sensitivity system that exceeds the performance of silicon photodiode systems over the wavelength range of 185nm to 800nm
AccuFiz LWIR laser interferometer
4D Technology has announced the release of the new AccuFiz LWIR laser interferometer
Laser Quantum
Finesse
Finesse is a highly-acclaimed range of DPSS pump lasers from Laser Quantum, specifically designed for the femtosecond Ti:S market. Finesse is now available in 4W, 5W and 6W versions.
Finesse 10W
Laser Quantum has released its Finesse 10 laser, featuring a proprietary cavity design, which achieves a highly stable, ultra quiet CW output in a diffraction-limited beam
10W Finesse laser
Laser Quantum has released a 10W model of its Finesse laser, featuring integrated cooling, ultra-quiet CW output, and the smallest footprint in its class
Aziza
Laser Quantum has launched the Aziza, 355nm laser, a True CW solid-state laser at 355nm. The laser offers a diffraction limited beam (M2<1.1), TEM00 and powers up to 25mW.
Tau compact CW laser
Laser Quantum's Tau laser is the first in its new line of compact CW lasers offering a highly-stable, diffraction limited beam offers 532nm output at up to 50mW
Finesse 12
Laser Quantum has introduced the Finesse 12, its most powerful laser to date, offering 12W of true CW output, low noise and a 532nm wavelength suitable for Ti:sapphire pumping applications
Excel
Laser Quantum has announced its new Excel laser model, a CW 532nm laser that is capable of up to 2W while maintaining noise at <0.5 per cent RMS
Lux Laser
Laser Quantum has launched the Lux laser that delivers up to 1W of 660nm laser power in a compact head design
Ventus
Laser Quantum has announced a redesign of its popular Ventus laser range into a more compact head and significant improvements in beam quality
Torus
Laser Quantum has launched its actively mode-locked single frequency 532nm 750mW Torus laser at Pittcon 2012
Laser SOS
Sapphire 355
Laser SOS has launched its 355nm laser marker, the Sapphire 355.
Laser Support Services
Ultrafast lasers
Laser Support Services offers the full range of Del Mar Photonics ultrafast lasers, including the Trestles Ti:Sapphire series, the Mavericks Cr-Forsterite laser and the Buccaneer Er-doped fibre laser.
Encore
Laser Support Services is distributing Glendale's lightweight, stylish and practical protective eyewear. The latest products include high transmission filters for YAG and diode lasers.
TIS-FD-09 A-scan Ti:Sapphire laser spectrometer
Laser Support Services has launched a laser spectrometer from Del Mar Photonics.
Chatarra laser
Laser Support Services has launched the CW and pulsed (including femtosecond option) laser Chatarra, from Del Mar Photonics. It is available in two main all-solid-state options: diode pumped or 1.9µm Tm fiber laser pumped.
Crystal Clarity filters
Laser Support Services has released eye protection products from Sperian - formerly Glendale Protective Technologies.
MM-1M-F Miniature Linear Stage
Laser Support Services has released its MM-1M-F Miniature Linear Stage (2 x 0.5 x 0.5-in), which delivers high-torque, 0.099µ resolution, 5mm travel, and precision positioning.
ST-8MTF-75 positioning stage
Laser Support Services is distributing Standa's ST-8MTF-75, an integral X-Y positioning stage that has an accuracy of less than 0.5µm microns with a repeatability of less than 0.5µm
Laser Zentrum Hannover
Laser calorimeter
Laser Zentrum Hannover has developed a laser calorimeter that can measure the absorption ot light in optical materials. It features high sensitivity, absolute calibration and a wide spectral range of test wavelength
Safety consulting
Laser Zentrum Hannover (LZH) now offers comprehensive consulting on matters of laser safety and possible hazardous emissions, covering interpretation of current regulations and on-site hazard analyses
Laser-Compact
'Technology' series lasers
Laser-Compact has launched a series of actively q-switched DPSS lasers which are intended to be used in industrial applications
Laser-export
Garnet
The Garnet model, a Q-switched UV laser for OEM from Laser-export, is an ideal ionisation source for mass-spectrometry
Laserlines
KW Series polygonal laser scanner
Laserlines has introduced the KW Series polygonal laser scanner, manufactured by Lincoln Laser Company, which features copper mirrors developed for material processing applications utilising high energy laser sources
Arex
UK distributor Laser Lines is pleased to introduce Arex, the ultra-compact fibre laser from Datalogic suitable for marking applications
Lasermet
LPM-1000
Lasermet has launched a laser power meter and a range of detector heads. The LPM-1000 is a digital handheld scope, which will automatically detect any head plugged into it.
Blocking screens
Lasermet has released new blocking screens to protect against accidental exposure or to provide long-term blocking of laser radiation at lower power densities.
ADM-1000
Lasermet has launched the new ADM-1000 advanced laser power meter. With excellent rise times, the instrument offers excellent performance combined with the ease of using a hand-held power meter.
ICS-10 and ICS-5 Laser Safety Interlock Systems
Lasermet has extended its range of Laser Interlock Systems to include two new systems - the ICS-10 and ICS-5.
LED Powered Laser Warning Sign
Lasermet has launched a new low-voltage LED powered Laser Warning Sign, the LEDS-L-2W.
Calibrating laser power meters
Lasermet has expanded its UK laser safety services by way of new laboratory facilities, including dedicated automated equipment for the testing and calibration of laser power meters
LS-20 laser safety shutter
Lasermet has introduced the LS-20 laser safety shutter, the latest addition to the company's range of fully-integrated laser safety systems
Ultra Range large area LED-powered signs
Lasermet has launched its Ultra Range of large area LED-powered signs, which offer extremely high clarity at all ambient light levels, alongside flexibility in the legends and colours that can be used
Flatfoot laser protection screens
Lasermet has launched its new Flatfoot laser blocking screen, providing protection from stray laser radiation
ADM 1000 laser power meter at 1MHz
Lasermet's new ADM 1000 is a hand-held, easy-to-use high performance, laser power meter that has a sampling rate of 1MHz
Advanced digital laser power and energy meter
Lasermet's advanced digital laser power and energy meter, the ADM1000, now has a PC interface programme enabling users to view and measure more data more accurately
ICS-6 ELISe
Lasermet has introduced the ICS-6 ELISe, which is the company's Expandable Laser Interlock System to performance level E, featuring full start-to-end dual channel architecture and fault detection, which conforms to the latest standards EN ISO 13849-1 to p
LaserOptik
Ion beam sputtering
LaserOptik has introduced an ion beam sputtering (IBS) service, providing advanced coating technology that can satisfy critical demands on laser optics, such as complex filters or high power supermirrors.
Cleanroom environment for IBS machine
Laseroptik has equipped one of its ion beam sputtering (IBS) machines in a special cleanroom environment in order to produce low loss super mirrors with a very high reflectivity
Lasertechnik Berlin
Aryelle 200
Lasertechnik Berlin has released the Aryelle 200, which is an echelle spectrometer with fibre coupling for different CCD, EMCCD und ICCD image detectors. It is characterised by high sensitivity and high imaging quality.
MNL 300
Lasertechnik Berlin has been authorised by Intertek to apply the ETL Listed Mark confirming that LTB's MNL 300 series lasers have been tested and deemed compliant to US and Canadian product safety standards
Laservision
Laser windows
Laservision is now offering plastic windows for CO2 lasers, certified according to DIN EN 207. They can be being built into laser safety housings, and for integrated into laser marking systems.
Eye protection filters
Laservision has introduced two new eye protection filters, for users working on active optical fibre equipment or associated cables that generate laser or LED signals.
Eyewear
Laservision has developed a sophisticated filter that has now successfully passed the independent testing for R L7 and R L8 suitable for protection against q-swtiched laser beams.
P1205 pink filter
Laservision has introduced its new polycarbonate pink filter P1205 which provides excellent colour recognition, especially in the red, which is especially useful in medical treatments.
EN207-compliant safety spectacles
Laservision is one of the first manufacturers of safety spectacles worldwide to demonstrate that its eyewear meets the mode-locked specification of European laser eyewear standard EN 207.
Protective glasses
The increase in laser power over recent years has meant the people who operate lasers need higher-protection safety glasses, which can become heavier and less comfortable than using conventional materials.
Safety goggles
Laservision has introduced laser safety goggles with small head straps and malleable temples, allowing the user to adjust the inclination of the frame, for extra comfort
Goggles and laser windows
Laservision has released a number of new photonics safety products, including two new safety goggles for laser and LED use, and a new range of safety windows.
Protective window
In addition to the certified plastic window P2008 for CO2 lasers Laservision has developed a second plastic window P2009 certified with L protection levels according to EN 207 for Nd:YAG laser applications.
All Star
The brand new All Star laser safety goggles from Laservision are versatile and provide high laser protection. They feature a highly efficient outside reinforcement, providing protection against scratches.
All Star
Laservision has introduced its latest laser safety eyewear frame, All Star, with a high-performance laser safety filter T08 for high-power CO2 lasers.
P1008
The new P1008 filter from Laservision provides effective protection against all wavelengths produced by Nd:YAG; Nd:glass, Nd:YLF and Nd:VO4 systems, including 1064nm, 532nm, 366nm and 266nm.
Limits
Laservision has released the latest version of its bilingual Limits software for laser safety education. It is suitable for use on training courses and for self-study.
Ion-doped mineral glass satisfying laser protection standard EN 207
Laservision has launched a range of safety spectacles that meet the mode-locked specification of European laser eyewear standard EN 207.
Head Support System
Laservision has released its Head Support System (HSS), which is a new support system for laser goggles. The HSS is suitable for heavy laser goggles.
Red laser safety goggles
Laservision has released a filter that protects users working with red line, cross, dot, or pilot lasers in the milli-watt range.
LIMITS laser safety training software
Laservision has released the latest bilingual version of its laser safety training software LIMITS.
Carry options for goggles
Laservision has developed new carry options for its goggles, which are an alternative solution to the DUO – FLEX temples.
P1011 filter for medical applications
Laservision has developed a brand new plastic filter, especially for medical treatments.
Laser safety windows and sheets
Laservision has released laser viewing sheets and windows, ideal for laser enclosures and rooms. They provide safe viewing of lasers from outside the nominal hazard zone
Laser safety domes
Laservision has developed a laser safety dome, designed especially for demonstration of laser applications in public areas or at trade shows
Roll-Up flexible laser safety barrier
LaserVision has launched its Roll-Up model flexible laser safety barrier for laser users requiring a temporary and portable laser safety solution
F16 safety spectacles
Laservision has introduced its F16 laser safety spectacle frames, compatible with the company's range of polycarbonate filters
Acrylic laser safety windows
Laservision has introduced absorptive acrylic windows to meet most laser safety requirements
LayTec
PearL PV metrology system
LayTec has introduced its in-line metrology system, PearL, measuring photoluminescence spectra of thin-film solar cell modules in production lines
Leoni Fiber Optics
Planar Lightwave Circuits
FiberTech RoMack, a Leoni Fiber Optics business unit, has introduced its Planar Lightwave Circuits (PLC), which include single mode 1 x N and 2 x N broadband splitters with up to 64 channels
Fibre optic solutions for medical laser delivery systems
Leoni Fiber Optics has introduced a line of standard and custom medical probes for the laser energy transmission of argon, Nd:YAG excimer, KTP and diode lasers
Lesco
Spectrum 365 LED UVA
Lesco (a division of American Ultraviolet) has introduced its Spectrum 365 LED UVA, a high-intensity spot curing UV source for spot curing applications
LG Motion
LGR rotary tables
LG Motion has launched a new range of manual and motorised rotary stages for precision positioning within laboratory, optical bench, and industrial automation applications
Liekki
OE-Yb-L-100
Liekki has introduced a series of 100W CW optical engine modules. The OE-Yb-L-100 modules integrate all the fibre amplifier or laser glass elements into a thermally-engineered package.
Light Tec
Code V 9.8
The newest release of CODE V optical design software from Optical Research Associates (ORA) delivers features to improve both the modelling and optimisation of optical systems.
Mini Diff
Light Tec has introduced the Mini Diff, a small and affordable BRDF/BTDF measurement system
LightPath Technologies
Lenses for IR
LightPath Technologies has introduced two new lenses to its range: an aspheric moulded lens for collimating IR laser light, and a LWIR lens for thermal imaging
Athermalised lenses for LWIR and thermal imaging
LightPath Technologies has introduced an athermalised f/1.3, 14.9mm focal length long wave IR lens assembly for thermal imaging with uncooled detectors in the 8-12µm wavelength range
Aspheric lenses for blue laser diodes
LightPath Technologies has introduced a new family of four aspheric lenses optimised for blue wavelength laser diodes. The lenses are designed for laser diodes operating at 405nm or 488nm
Moulded infrared aspheres for thermal applications
LightPath Technologies has introduced two new moulded infrared aspheres, designed to serve as the primary optics for thermal imagers or as collimating lenses for quantum cascade lasers
Moulded aspheric lenses for mid-wave infrared
LightPath Technologies has added a new mid-wave infrared (MWIR) aspheric lens to its catalogue of aspheric lenses designed for infrared applications including QCLs
LightTrans
VirtualLab 5
LightTrans recently introduced its VirtualLab 5 software for field tracing during the design of optical systems, a technique that provides more information than ray tracing about the light in optical simulations
LIMO
LIMO 350W pump modules
Limo#s fibre-coupled high-power-diode-laser LIMO300-F600-DL940 and LIMO350-F400-DL940 emit 300W out of a 600µm fibre core and 350W out of a 400µm fibre core, respectively.
Homogenisation modules
The next generation of homogenisation modules from LIMO is based on a modular mechanical and optical concept.
LIMO50-L28x28-DL795-EX473
Limo has released a high-power diode laser, designed to homogeneously illuminate an area of 28 x 28 x 80mm. The LIMO50-L28x28-DL795-EX473 emits 50W output power.
Limo direct diode laser
Limo has released its 20mm mrad direct diode laser.
Microlens Arrays
Limo has launched arrays with 0.8mm and 0.5mm lenses. The microlens arrays are made of synthetic fused silica and can be used from UV to IR.
Second generation of Gaussian-to-Top-Hat converters
LIMO has released its second generation of compact refractive Gaussian-to-Top-Hat converters.
Limo diode laser at 1,470nm
Limo has released its diode laser module LIMO30-F400-DL1470-EX880, which operates at 1,470nm.
g2T-Scan scanning beam-profiler
LIMO has introduced its g2T-Scan two-in-one beam profiler and scanning system. The system can transform Gaussian beams into homogeneous 'top hat' profiles, uses galvo mirrors and an f-theta objective lens
Lazo-Workstation
Limo has launched the Lazo-Workstation, developed for a particularly smooth and accurate travel, as required for the development of many process-optimised surface applications, such as photovoltaic and semiconductor applications.
60W pump module
Limo has introduced a 60W pump module, with 100µm fibre, as well as a one-bar system, housed within a space-saving housing
1470nm compact diode laser
Limo has added a 1,470nm version to its standard product portfolio of compact diode lasers, featuring output power of 12W and 25W, with further customised types available at more than 100W
L3 line lasers
Limo has introduced its L3 family of high-power line lasers. The lasers are intended for applications within process development and optimisation, and they are well-suited to applications involving thin films
Beam Transformation System
Limo has expanded the product portfolio of its BTS (Beam Transformation System) to accommodate a wider range of wavelengths (from 600nm to 1,600nm)
793nm diode lasers with back-reflection filters
Limo's established line of 793nm diode lasers are now equipped with back-reflection filters for the wavelength range of 1.9 to 2.1µm
Diffractive beam splitter
Limo has expanded its product portfolio with a diffractive beam splitter, which has a continuous profile, unlike conventional binary diffractive optical elements (DOE)
Efficient diode laser system
LIMO Lissotschenko Mikrooptik, located in Dortmund, Germany, has introduced a 1.3kW diode laser system with wall-plug efficiency of 30 per cent, (including cooling)
L³ Line Laser
Limo has developed its new L³ Line Laser for the homogeneous illumination of inline testing for applications such as photovoltaics and semiconductor production
L3 Line Laser
Limo has announced that its L⊃3 Line Laser generates a very homogeneous illuminated line for scanning a solar cell 156mm by 156mm in size
Diocut
Limo has introduced Diocut, an energy-efficient 2kW diode laser system which, in eight-hour constant operation, consumes approximately 20 per cent less energy than a comparable fibre laser
Line laser
Limo has introduced a range of laser line generators suitable for use in solar cell production
Limo Lissotschenko Mikrooptik
Twin-wavelength diode laser for surgical applications
Limo has developed a compact diode laser delivering a wavelength of 1,470nm in combination with an additional parallel wavelength of either 980nm, 940nm or 810nm for medical applications
Replaceable window for L-Mount laser
LIMO Lissotschenko Mikrooptik of Dortmund has given its L-Mount type fibre-coupled diode laser modules an additional replaceable window, which saves the user both time and money
L-Mount fiber-coupled diode laser module
Limo Lissotschenko Mikrooptik is promoting its L-Mount fiber-coupled diode laser module that has a 60Watt output
LOT
Xe arc lamp monochromatic light sources
LOT now offers a new range of standard monochromatic light source packages based on xenon arc lamp sources coupled with the company's monochromators at various focal lengths
LOT Oriel
Abet Gen II
Sun 2000 Solar Simulators has released the Abet Gen II, which is a patent pending optical design that increases the percentage of photons reaching the work plane.
Online light source catalogue
LOT Oriel has launched an online light source catalogue to simplify choosing the right light source for a specific application
Lot-Oriel
SVC HR-1024
The SVC HR-1024 from Lot-Oriel is small, light, and self-contained. It can easily be operated by one person even in challenging field conditions
Andor iDus InGaAs detector array system
LOT-Oriel has released the Andor iDus InGaAs detector array system, which is part of the iDus range of detectors.
T-Solar ellipsometer
Lot-Oriel has introduced its T-Solar ellipsometer, combining various photovoltaic measurement technologies into a single system designed specifically for textured samples
LOT-QuantumDesign
NeoScope II
LOT-QuantumDesign has been appointed distributor of the JEOL NeoScope II benchtop scanning electron microscope (SEM) throughout the UK and Eire
LPKF Laser and Electronics
LQ-Smart
The LPKF LQ-Smart is a two-piece laser welding system with a small workbench footprint
LTB Lasertechnik
USB-powered microjoule energy meter
LTB Lasertecknik has introduced a USB-powered, pyroelectric energy meter, sensitive to low energy pulses of 30nJ to 250ìJ. The 14-bit sensor features a background noise limit of 6nJ
LTB Lasertechnik Berlin
µ-Joule Meter
The µ-Joule Meter, from LTB Lasertechnik Berlin, is an energy measuring module for pulsed lasers that can be used for measuring very small pulse energies (30nJ–250µJ) and it is characterised by a very low background noise limit of 6nJ
Lumax Photonics
Fibre-to-fibre coupler series
Lumax Photonics has launched its new high-power fibre-to-fibre coupler series for fibre-coupled diode lasers. The optical couplers are suitable for fibre-coupled devices based on single emitters or laser bars
Lumen Dynamics Group
OmniCure UV LED Max
Lumen Dynamics Group has introduced its new OmniCure UV LED Max heads, the latest addition to the company's OmniCure line of accessories for use with its LX400 LED curing system
Lumera Laser
Super-Rapid
Lumera Laser has recently released a new picosecond laser, Super-Rapid. It is an amplified version (8W) of the Rapid ps-laser, maintaining all its outstanding features and expanding them.
Blaze nanosecond lasers
Lumera Laser has introduced its Blaze series of high-performance nanosecond lasers. The company's patented SpotLock pumping technology allows the lasers offer excellent beam characteristic even at high average power and repetition rates
Lumerical Solutions
FDTD Solutions 8.0
Lumerical Solutions has announced the release of FDTD Solutions 8.0, the nanophotonic design environment based on the finite-difference time-domain (FDTD) technique
Lumex
TitanBrite LED
Lumex has launched its new TitanBrite 2W UV LED, which aims to offers energy savings of 70 per cent and space savings of up to 90 per cent compared to alternative technologies
Luna Innovations
Phoenix 1000 tunable laser
Luna Innovations has launched the Phoenix 1000, under its Luna Technologies brand of test and measurement products.
ODiSI fibre optic sensor
Luna Innovations has launched its new ODiSI (Optical Distributed Sensor Interrogator) instrument, a sensing platform that will be marketed and sold under the company's test and measurement equipment brand name Luna Technologies
Luna Technologies
OBR 4600
Luna Technologies has launched the OBR 4600, the latest addition to its Optical Backscatter Reflectometer product line
Not listed? Click here
News