Browse products by company
Saint-Gobain Crystals has expanded its range of Titanium:Sapphire (Ti:S) products to include aperture dimensions as small as 1mm, for use in compact laser oscillators.
Saint-Gobain Crystals has released two high-reflective thin-film coatings for demanding beam steering tasks in Ti:S ultrafast laser applications.
Saint-Gobain Crystals has expanded the company's Alpine Research Optics brand of laser-grade optics with a new series of high reflectors specifically optimised for use with q-switched, solid state (Nd:YAG, Nd:YVO4 and Nd:YLF) lasers operating in the near
Saint-Gobain Crystals has introduced a series of high-performance harmonic separators, optimised for use with high-power solid-state lasers. Both short-wave pass and long-wave pass designs are available
Saint-Gobain Crystals has introduced a new highly reflective coating, specifically intended for excimer laser-based scanning, suitable for a range of incident angles and broad wavelength bandwidths
Saint-Gobain Crystals has introduced a range of high-performance, thin-film plate polarisers optimised for use with Nd:YAG, Nd:YVO4 and Nd:YLF lasers operating at 1064nm, 1053nm, 532nm, 355nm and 266nm
Scanlab has introduced a new, modular three-axis scan system consisting of a varioScan 40Flex directly mounted onto a hurryScan 30 scan head.
Scanlab has released the varioScan 20i, a digital control for smart focusing. The device builds on the successful intelliScan series of digitally controlled scan heads
At the recent Photonics West exhibition, ScannerMax, a new division of Pangolin Laser Systems, unveiled a galvanometer-based optical scanner
Schleifring has developed a range of slip rings for use in computed tomography systems. The development of this optical slip ring enables the transmission range to be extended as far as 10GBit/s and upwards.
The MEMS devices that are used in millions of sensors, print heads and micro-reactors need high precision substrate materials made of glass. Schott offers high-quality and customised wafers for this purpose.
Schott has released its AF 32 glass, which is designed for leading-edge opto-electronics applications.
Schott has expanded its line of advanced optics to include infrared (IR) materials.
Schott has introduced glass rods with diameters of less than 1mm and up to 1,000mm in length, in addition to its existing shapes, in order to support the miniaturisation of optical applications.
Schott has developed a precision moulding process for producing strips and arrays of high refractive miniature lenses out of glass
The Association of Universities for Research in Astronomy (AURA) has selected Schott to build the 4 metre primary mirror blank for the Advanced Technology Solar Telescope (ATST), which will be the world's largest solar telescope
Schott has developed a range of fused fibre bundles for forming 'square' laser diode light into a homogeneous beams of any shape required
Schott says it is the first manufacturer to offer special optical glasses of the tolerance level 0.5
At the Laser World of Photonics, Schott has been showcasing its 'eye-safe' LG-940 laser glass, which it says is ideal for operation at 1.5 microns in medical applications, analytical measurement and range finding
Schott Advanced Optics
Schott Advanced Optics has released an improved version of its LASF35 glass (nd = 2.02204; vd = 29.06). In doing so, Schott is optimising its line of glasses that feature high refractive indexes in extreme regions of the Abbe diagram.
Schott's 1mm thin band-pass filter VG20 that shows strong absorption in the near infrared (NIR) range is now available.
Schott and Moritex have introduced their latest product, a telecentric illuminator built on a concept for precision measurement using backlights
Scitec has released the Radikon, used to provide control depending on the value generated by a detector (e.g. radiation sensor or pressure sensor)
Scitec Instruments has introduced an E/O to O/E converter pair that enables precise transmission of one analogue plus four digital channels of information over fibre optic links up to 10km.
Scitec Instruments has introduced a new 4W wire wound IR source suitable for use in laboratory or field instrumentation due to its long life and stable properties.
Scitec Instruments has introduced a small rugged automated fibre optic loss test set that characterises singlemode fibre links at wavelengths of 1310, 1490 and 1550nm.
Scitec Instruments has released a Visual Fault Locator for visually identifying breaks or microbends in optical fibres. The instrument can also be used for fibre identification in an optical fibre bundle.
Scitec Instruments has introduced the LTX-5525, from Terahertz Technologies, which is an E/O-O/E converter pair that enables transmission of 16 independent channels of digital information over fibre optic links from metres to more than 10km
The FW-2000 motorised filter wheel from Terahertz Technologies is now available from Scitec Instruments.
Scitec Instruments Polska has announced that it is distributing the SLIM-561 yellow DPSS laser manufactured by Oxxius, emitting 150mW at 561nm. It is suitable for LDV, TIRF or flow cytometry
Scitec Instruments has released an optical chopper using 200mm diameter discs, which allows modulation of larger diameter beams.
Scitec Instruments is now able to offer complete UV measurement solutions, manufactured by sglux of Germany, for medical, industrial and scientific applications
Scitec Instruments has introduced a precision-engineered, black anodised mounting clamp for use with 12mm diameter laser modules
A blue DPSS laser from Oxxius, emitting up to 50mW at 473nm, is now available from Scitec Instruments.
Scitec Instruments has introduced three near UV laser diode modules from Oxxius. The Violet-375, Violet-405, and Violet-445 modules offers a collimated optical beam in a compact radial package
The DA and DE Series from SDS deliver up to 6W of power from 1-6kV with input voltages between 15 and 24V. The APD Series provides up to 100mW of power from 200-500V with an input voltage 5V.
SEDI Fibres Optiques
SEDI Fibres Optiques has released a connector for very high power laser delivery systems used in industrial or medical applications and compatible to the Mitsubishi design.
Selec Sensors and Airborne Systems
Selex Sensors and Airborne Systems has launched Wren, a high performance uncooled single element pyroelectric detector for use in infrared (IR) microscopy.
Semrock has expanded its line of opto-mechanical mounts with the addition of the FH1 filter holder, which is designed to secure dichroic beamsplitters without affecting flatness, while allowing for angle tuning or other motorised options
Semrock has released four new optical filter sets for fluorescence imaging, which enable the choice of substantially increased brightness or enhanced contrast when imaging with FITC or GFP fluorophores
Semrock has released four new BrightLine long-pass fluorescence filter sets to enhance its full line of established high-performance bandpass filter sets
Semrock (Part of Idex Corporation) has added the TBP01-800/12 NIR filter to its VersaChrome range of tunable thin-film optical filters, offering a tunable range of more than 100nm
Semrock has increased the flexibility of its EdgeBasic family of long pass-edge filters with the addition of 10 laser wavelengths to the 19 currently on offer
Semrock has announced the production of an 11 band filter with steep edges, within a 100nm-wide spectral window
SensL's HRMTime is one of the first USB high-resolution timing modules on the market. With 27ps timing resolution, this flexible and high-performance module eliminates the need for multiple PCI cards.
The SPMScint from SensL is a solid-state detector that is sensitive to single photons. It is a low-cost device that consists of an array of geiger mode avalanche photodiodes (APDs).
The SPMPlus is a large area version of SensL's SPM detectors incorporating an array of individual Silicon Photomultipliers (SPM) pixels tiled together using a novel packaging concept.
The SPMPlus is a large area version of SensL's SPM detectors incorporating an array of individual Silicon Photomultipliers (SPM) pixels tiled together using a novel packaging concept.
sensL has released what it claims is the industry's first four-sided, scalable, low-light detecting silicon photomultiplier (SPM) array for medical imaging, radiation detection, analytical instruments and high energy physics
SensL has launched its SPMMatrix silicon photomultiplier based imaging system for applications such as nuclear medicine, homeland security and high energy physics
SensL has introduced the SL family of silicon photomultipliers (SPMs), featuring the highest signal-to-noise ratio of any SPM, 4x higher than previous generation SensL products
Sensofar-Tech has introduced its PLu apex non-contact 2D optical profiling system, designed for measuring any optical surface, including aspheric and free-form optics
Sensors Unlimited has released a higher line rate for the high resolution SU-LDH digital line scan near-infrared camera.
Sensors Unlimited has released its LC Series Linear Photodiode Arrays. The SU256LCS-2.6T2 detector array is available with 256 elements of extended response InGaAs material.
Sensors Unlimited has launched its Shortwave Infrared (SWIR) Linear Photodiode LC-Series Array.
Seoul Semiconductor has released a range of top view LEDs with high colour rendering index (CRI), a luminous efficacy of 70lm/W and a life expectancy that exceeds 50,000 hours.
Silicann Technologies has released a new control unit for the PCS series of colour sensors. The stand-alone unit allows parameters to be controlled in an easy-to-understand interface similar to standard PC software.
Sill Optics has introduced a variable LED dimmer for use with condensors, lenses with coaxial surface illumination and other LEDs with current limiting and current consumption between 50mA and 450mA.
When a short pulse travels through a dispersive medium, the component frequencies are separated in time. Sill Optics provides beam achromatic expanders and f-theta objectives to account for this.
Sill Optics developed a precision aspheric LED collimator S6IRI154x, which is compatible with the standard version S6IRI153x.
Sill Optics has designed some beam achromatic expanders and f-theta objectives which minimise chirp on the pulses of femtosecond lasers.
Sill Optics has launched large aperture beam expanders, which incorporate fused silica lenses.
Sill Optics has released its ALPHA (Absorption Low Plus High Aperture) series of fused silica beam expanders for high power lasers emitting from 1,030nm to 1,090nm.
Sill Optics has released the series S4LFT5165, a telecentric scan lens optimised for either 532 or 1,064nm.
Sill Optics has introduced its Series Alpha (Absorption Low Plus High Aperture) range of fused silica beam expanders for high power lasers emitting from 1,030nm to 1,090nm
Sill Optics has extended its series of fused silica scan lenses for higher power fibre, fibre-delivered or slab lasers, which emit in the 1,030 to 1,090nm wavelength
Sill Optics provides asphere or 2-axis f-theta lens optics for use with 1.4um to 2um erbium or thulium fibre lasers, as used for welding clear polymers
Sill Optics is now offering an f-theta scan lens, model S4FLT2500/328, which can accommodate multi kW high power lasers
Sill Optics says it is aiming to reduce cost pressure in the labelling sector with its new cost-optimised scan lenses for popular focal lengths from 105mm, 160mm and 254mm
SmartQuantum has released its SQLightSensor, an ultra-low noise near-IR single photon detector based on a Geiger-mode InGaAs avalanche photodiode and an internal thermoelectric cooler
Sofradir has released its new avalanche photodiode mid-TV format IR detector, for amplifying low input signals in military applications, active imagery, spectrometry, gas detection and a range of scientific applications
Sofradir has launched the Altair MWIR-MWIR, a multiple wavelength IR detector for missile warning systems
Sofradir, a manufacturer of advanced infrared detectors for military, space and industrial applications, has released its Scorpio LW 640 x 512 IR detector
Sofradir has announced its High Operating Temperature L-HOT medium wave infrared integrated detector cooler assembly prototype that the company claims offers a significantly improved detection range over earlier models
Southern Photonics has announced a new product for its Coherent Solutions range, its IQScope-30G for optical modulation analysis (OMA)
Spartanics has introduced a new turnkey digital print-to-laser cutting system, aimed at designers of electronics, lighting and AV product labels as well, as other precision cut electronic components
USA-based supplier of laser die cutting systems Spartanics Design has introduced a new applications laboratory and a service for engineers to check the suitability of their materials
Special Optics has introduced four telecentric UV scanning lenses to accommodate large input beam diameters of up to 17mm and wavelengths of 266 or 355nm.
Specialised Imaging has launched the Trajectory Tracker, which is a next generation video projectile tracking system.
Specialised Imaging has introduced the OT-2 Optical Trigger, which can be used as a general purpose optical detector that detects either a very bright flash of light or an object moving across its field of view
The Specialised Imaging Shadowgraph camera from Specialised Imaging enables high resolution digital imaging of ultra fast events in ambient as well as low light environments
Spectra-Physics, a division of Newport Corporation, has been granted a US patent for its DeepSee technology for multiphoton imaging
Spectra-Physics has introduced Spirit, a compact industrial-grade ultrafast amplifier with software-adjustable repetition rates up to 1MHz
Spectra-Physics has launched the Millennia Edge single-frequency, continuous wave (CW) green laser. The 532nm laser features low optical noise, exceptional beam quality and pointing stability, and all in a compact package
Spectra-Physics has introduced two new industrial Q-switched lasers for 24/7 microelectronics manufacturing applications
Spectra-Physics has introduced a green Q-switched laser for microelectronics manufacturing applications
Spectra-Physics, a Newport brand, has launched Explorer XP 355-1 - which it claims is the world’s smallest 1 W ultraviolet (UV) Q-switched diode-pumped solid-state (DPSS) laser
Spectra-Physics, a Newport Corporation brand, has introduced Spirit 8W, an industrial-grade high power femtosecond (fs) laser for micromachining applications
Spectra-Physics, a Newport brand, has introduced the Quasar, a breakthrough hybrid fibre laser that delivers high UV power at high repetition rates with TimeShift technology for high-throughput, precise micro-machining
Spectra-Physics has expanded its range of Excelsior One continuous wave (CW) laser series
Spectra-Physics, a Newport brand, has introduced Spirit ps 1040-10, an industrial-grade picosecond laser for precision micromachining applications
Spectra-Physics has introduced Spirit-OPA, an automated optical parametric amplifier (OPA) specifically optimised for use with Spectra-Physics' Spirit high-repetition-rate ultrafast laser
Spectra-Physics has introduced its Explorer One, an actively Q-switched diode-pumped solid-state ultraviolet laser.
Spectra-Physics has introduced its Quasar 355-45, a UV laser that delivers >45W (225uJ)
Spectra-Physics has introduced the Spirit-OPA, an automated optical parametric amplifier (OPA) specifically for use with Spectra-Physics' Spirit high-repetition-rate ultrafast laser
Spectral Imaging (Specim) has extended its ImSpector Enhanced series of imaging spectrographs with high-resolution imaging Raman spectrographs, combining high light throughput, distortion-free performance, and polarisation-free optical design
Spectrum Detector has released a family of USB-powered, digital energy meters that feature single and two channel LabView Applications Software for laser energy measurements and experiments.
Spectrum Detector has introduced a general-purpose digital optical chopper for use with its pyroelectric detectors and instruments.
Spectrum Detector introduced several pyroelectric detectors and instruments for use in the THz spectral range (30µm to 3 mm).
Spectrum Detector has released five optical power and energy measurement solutions.
Spectrum Detector has launched its Trap Series of digital radiometers and joulemeters, which can achieve a measurement uncertainty of less than 1 per cent on multiple points across the spectrum.
Spectrum Detector has released its deltA Joulemeter Series. The deltA NIR Joulemeter provides near-IR spectral response from 0.9 to 1.7um, while also offering numerous performance advantages unique to the deltA Series of joulemeters and radiometers.
Spectrum Detector has released a joulemeter and probes capable of measuring the pulse energy of a laser running at 100,000pps.
Spectrum Detector has released the mach 5, a 100 kHz digital joulemeter that produces real-time, pulse-to-pulse energy measurement of high rep rate laser sources.
Spectrum Detector has introduced the MDJ10, a versatile 10 channel multiplexed digital Joulemeter for use with pulsed lasers. The device is sensitive to wavelengths from deep-UV to far-IR
Spectrum Detector has introduced two new models of its 'delta' range of large area, 25mm diameter pyroelectric Joulemeter probes, able to measure wavelengths from deep ultraviolet to far infrared.
Spectrum Detector, a manufacturer of THz sensors and diagnostic instruments, has introduced the T.rad 1000D, a broadband pyroelectric radiometer for intensity measurements covering the entire THz spectrum (0.1-30THz).
Spectrum Detector has designed and now manufactures a complete line of LiTaO3 pyroelectric detectors that are direct, PIN compatible replacements for the company's older Molectron detectors
Spectrum Detector has introduced its T.rad series of broadband digital radiometers with high sensitivity in the far-IR and THz spectrum (0.1-100THz)
Spectrum Scientific has introduced its newest aberration-corrected blazed holographic concave grating. SSI’s new 470-250-040 grating has a very high efficiency of 85 per cent at the 250nm blaze wavelength.
Spectrum Scientific has introduced replicated hollow corner cube retroreflectors to its line of standard services
Sperian has extended its Crystal Clarity line of laser safety with the introduction of two new filters available in the company's New York or Encore frames
Sperian Eye & Face Protection
Sperian Eye & Face Protection has introduced its Sperian Milan laser safety eyewear, featuring high-transmission polymer filters for improved visibility
Sperian Protection has released a line of filters designed to meet the protective requirements of those who need to align laser beams in the course of their work.
Sperian Protection has introduced its new Sperian Milan laser safety eyewear, which addresses the complicated factors of laser protection without compromising contemporary stying, fashion or adaptability
Sperian Protection has expanded its line of high transmission filters and now offers an HT Diode and YAG filter for its line of laser safety eyewear
Sperian Protection has introduced its New York model of laser safety eyewear, which offers laser protection with a blend of comfort and style
Sperian Protection has launched two polymer-based laser safety filters providing protection levels that were previously only possible with glass technology
SPI Lasers has released the 10 & 20W RM (restricted modulation) G3 pulsed laser modules for marking applications, providing a value-engineered solution that is ideally suited to high volume, single application operations.
SPI Lasers has launched an ST (Superior Temperature) variant of it G3 20W pulsed laser.
SPI Lasers has released a 30W fibre laser, which is aimed at faster and higher quality marking, engraving and ablation applications.
SPI Lasers has released its 30W Pulsed Laser, which extends the output power of the existing pulsed product range.
SPI Lasers has launched its 20W ST (Superior Temperature) pulsed fibre laser, which has an extended temperature range and is capable of operating at full power in all ambient environments up to 45°C (HS model 35°C) making it ideal for hot climates
SPI Lasers has released the R4 25-400W platform of air-cooled or water-cooled high powered fibre lasers.
SPI Lasers has released a range of high power OEM fibre lasers, which can be used stand alone or incorporated into high power laser systems for cutting and welding applications in the industrial macro market.
SPI Lasers, a designer and manufacturer of fibre lasers has launched a CW low-moded laser designed for thin material spot welding
Spiricon has released a laser beam analyser, LBA-USB, which incorporates a series of USB 2.0 CCD cameras for laser beam profiling.
Spiricon has announced BeamGage 5.7, the latest version of its laser beam analysis software
Stanford Research has launched its SR475 laser shutter and the SR470 and SR474 laser shutter controllers.
StellarNet has announced the UVN-Super-Range spectrometer for 200-1100nm with high speed USB-2 interface. The portable, low-cost, high-resolution spectrograph delivers high efficiency across the entire spectrum.
StellarNet has launched the NIRX-SR series of spectrometers for the 0.9-2.2Âµm wavelength range with a 512-element InGaAs photo diode array and high speed USB-2.0 interface.
StellarNet has announced the CXR-FS, a low-cost system for fluorescence spectroscopy. The components include a miniature fibre-optically coupled and thermo-electrically cooled (TEC) UV-VIS spectrometer with concave grating.
StellarNet has developed the Super Range concave grating spectrometer for UV-Vis-NIR range from 200-1100nm. It provides excellent imaging and high spectral efficiency.
The new miniature Green-Wave range of fibre optic spectrometers from StellarNet includes 15 models to cover the UV-VIS-NIR wavelength ranges from 190-1150nm.
StellarNet has expanded its line of NIR spectrometers to include the NIRX-SR series.
StellarNet has announced a new, miniature Deuterium/Tungsten light source covering the 200-1700nm range in a single unit. Its high output power enables use for reflectance measurements, where lower power light sources (like SL5-DH) are too weak.
StellarNet has released its Blue-Wave Spectrometers, which measure in the UV-VIS-NIR wavelength ranges from 190-1,150nm.
StellarNet has released its Spectrocolorimeters, which measure the colour of solid and liquid samples using a fibre optic reflectance probe, fixture, dip probe, or cuvette holder.
StellarNet has released its ThinFilmCompanion software, which is a Thin Film System for in-situ and in-line measurements of film structures, including single and multilayer, freestanding, rough, and both thick and thin layer structures.
StellarNet has launched a low-cost line of non-contact thin film measurement systems that come complete with the necessary instrumentation and sofware
StellarNet has introduced the Black-Comet series of concave grating spectrometers, which utilise a holographic aberration-corrected concave grating for UV-VIS and UVN measurements
StellarNet has introduced the Blue-Wave line of miniature fibre optic spectrometers for UV-VIS-NIR, featuring 15 models designed for portable and rugged applications that require high-speed USB2 and 16-bit accuracy
StellarNet has launched the Red-Wave line of miniature NIR spectrometers for 0.9-2.3um wavelengths, which use cooled InGaAs detector photo diode arrays and are available in 512 or 1,024 element arrays
StellarNet has introduced the newest member of its Red-Wave NIR spectrometer product series, the Dwarf-Star, offering resolution as high as 1.5nm in the 900-1700nm wavelength range
StellarNet has introduced the Black-Comet-HR spectrometer. Designed for high resolution applications, the spectrometer is available for measurements in two ranges: UV (200-600nm) and visible (380-750nm)
StellarNet has released its ChemWiz Analyzer Development Kit (ADK), which can perform full spectrum chemometric analysis for multiple components
StellarNet has released a new series of updated spectrometers configured for Raman spectroscopy applications that perform quick identification of a variety of liquid, solid, or powder samples
StellarNet is now offering a variety of Raman lasers and accessories for Raman spectroscopy applications that can be used to perform quick identification of a variety of liquid, solid and powder samples
A new software update to StellarNet's SpectraWiz, bundled with every spectrometer, is now available for download at www.stellarnet.us
StellarNet has released a series of portable Raman spectrometers that use InGaAs detectors to capture NIR spectra induced by 1064nm lasers
StellarNet has released a new high-performance spectrometer, the Silver-Nova
STIL has released its latest generation of confocal chromatic sensors, the MPLS 180 series, which provides ultrafast non-contact distance measurements.
STIL has released its MPLS180 sensor, which is a line chromatic confocal sensor.
Stil, inventor and manufacturer of the chromatic confocal distance sensor (CCS), has added a 'double frequency' function to the CCS Prima range of point sensors
StingRay Optics has released a 50mm Midwave Infrared (MWIR) Large Format Lens Assembly. The new lens was developed with an optional microscanning and step-stare sensor capability for enhanced imaging requirements.
StingRay Optics has introduced its SuperBand series of superspectral achromatised lenses designed for applications in detector technology, offering achromatic imaging from visible to far-infrared wavelengths
StockerYale has introduced the UV Cobra Linescan Illuminator, which emits at 375nm and 395nm, and is based on StockerYaleâ€™s unique, patented chip-on-board reflective array (COBRA) technology.
StockerYale has enhanced the SNF laser. The Lasiris SNF laser, known for its versatility in machine vision applications, is now available with increased line uniformity options.
StockerYale is providing Lasiris laser line generators that are able to project from three to 99 parallel lines with a high degree of uniformity across the lines.
StockerYale's Magnum II structured light laser is a high power line generator, which is now available in 7W.
StockerYale's PureBeam laser is a temperature-stabilised, fibre-coupled device for a wide range of biomedical, medical, and industrial applications.
StockerYale's Lasiris T-MFL produces long telecentric lines as thin as 9.0µm 1/e⊃2 at a specified working distance and is designed for applications where utmost accuracy and precision are required.
StockerYale's Flat-Top Generator is a laser beam shaping module that converts a Gaussian beam into a focused, collimated, or diverging flat-top profile.
StockerYale has released its PureBeam laser, which is a temperature-stabilised, fibre-coupled device intended for bioinstrumentation applications, including flow cytometry, confocal microscopy, bio-detection, DNA sequencing and more.
StockerYale has released its ColdRay laser, which is a temperature-stabilised device with excellent wavelength, power and pointing stability, as well as a long lifetime.
StockerYale has released the Cobra Slim LED, which builds on the original Cobra and can now focus on the complete range of linescan illumination requirements including fluorescents and metal halide.
StockerYale has released its Lasiris T-MFL laser, which produces long telecentric lines.
StockerYale's Lasiris Green PowerLine 532nm laser offers a thermoelectric system and fan that maintain a constant laser diode temperature, resulting in a better wavelength, power and pointing stabilities.
StockerYale has made improvements to the modular design of the Cobra Slim range of illuminators
StockerYale's Lasiris Powerline laser emits uniform laser lines at high powers, up to 2W at 810nm
Stratophase, a specialist in real-time chemical and biochemical measurement, has introduced a new bench-top control centre capable of monitoring up to eight independent in-line SpectroSens optical sensors
SUNX has released the SUNX LP-V series of Laser Markers.
SUNX has released its SUNX LP-V series of Laser Markers.
SUNX has released its latest generation of laser markers, which use an enhancement of YAG technology called FAYb (Fibre Amplified Ytterbium) within a working area of 160mm x 160mm.
Symetrie has introduced its Bora miniature hexapod precision positioning system. The Bora hexapod is 157mm tall, and can position a 10kg payload with a 0.1µm resolution
French company Symetrie has launched Joran, a positioning hexapod with high stability, designed for demanding optical applications
Syngene has released a web-based filter and lighting selector. This service is designed to save researchers using Syngene image analysers valuable time, by helping them choose the right filter and lighting combination for a vast range of dye applications.
Synopsys has released version 7.1 of its LightTools illumination design and analysis software, supporting IES photometry types A and B for orienting intensity data from both far-field and surface receivers
Synopsys has released v10.3 of Code V, its optical design and analysis software package
LightTools, available from Synopsys, is a 3D optical engineering and design software product that supports virtual prototyping, simulation, optimisation, and photorealistic renderings of illumination applications
Synopsys has launched the latest version of its illumination design and analysis software package, LightTools 7.2
Optical Research Associates' Code V optical design and analysis software version 10.4 is now available following ORA's takeover by Synopsys, an electronic systems design and verification software company
Synrad has released its Firestar v30, 30W CO2 laser. Designed for rugged industrial environments, the Firestar v30 combines high performance with compact size and air-cooling, suitable for marking and engraving
Not listed? Click here