Modelling the interactions at femtosecond junctions

Share this on social media:

                                                                                                                                                                                                                         Sponsored by: 

A research team has created software for modelling femtosecond pulses that overlap at angles of up to 140 degrees much more efficiently than existing systems

Software developed in Poland makes it possible to model interactions of femtosecond laser pulses travelling at an angle on a laptop; calculations that typically would have previously required entire computer clusters, according to the researchers. 

The latest version of the software, called Hussar, was produced by scientists at the Laser Centre of the Institute of Physical Chemistry of the Polish Academy of Sciences (IPC PAS) and the Faculty of Physics of the University of Warsaw.

Femtosecond laser pulses now play a key role in many experiments and measuring systems. When there is more than one laser beam with pulses, their mutual interactions give rise to interesting effects. Unfortunately, modelling of these effects has, so far, been difficult. When the overlapping beams run in a collinear fashion, the modelling of their mutual influence can be accomplished without approximations – relatively quickly and efficiently. However, in many applications ultra-short laser pulses have to converge at an angle. The mathematical description of the occurring phenomena then becomes so complicated that, for simulations to be finished in a reasonable time, whole computer clusters have to become involved. 

Now, thanks to the Hussar software, anyone can perform the appropriate simulations on even an ordinary computer, according to the research team behind the software. 

‘The changes introduced in the latest version of the Hussar program are radical. Experiments, which until now could not be simulated even by large laser centres, can now be designed – and after a certain time, probably also performed – by researchers from much smaller laboratories,’ said Dr Tomasz Kardas (IPC PAS), author of the software.

Until now, to accurately describe the interaction of two or more converging beams of ultra-short electromagnetic pulses, the finite difference time domain (FDTD) method was used, using full Maxwell equations. In terms of calculation, FDTD is extremely time-consuming: a single simulation takes supercomputers many days. The situation was exacerbated by the fact that, even after the involvement of computational clusters, the results obtained in an acceptable time were for small volumes – often only micrometres in size. For these reasons, those dealing with laser opticians used so-called unidirectional methods, especially those using an equation known as the nonlinear Schrödinger equation (NLSE) and the lesser known, but more accurate, unidirectional pulse propagation equation (UPPE). These equations enabled simulations of pulse propagation over long distances of the order of metres. Simultaneously, they were also overcoming a serious limitation: the overlapping beams had to be practically co-aligned (approximated results could be obtained for beam deviation not exceeding one degree).

‘For some time now, we have been developing software that simulates without approximations what happens when femtosecond laser pulses overlap, naturally taking into account so-called non-linear phenomena. Like others, we were limited to collinear beams for computational reasons. Fortunately, we have recently been able to significantly improve the mathematical description and use a unidirectional approach for modelling beams at their crossroads. We have used the occasion to create some interesting tools, for example, a pulse electric field rotation algorithm a thousand times faster than the interpolation usually used for this purpose,’ explained Kardas. He emphasised that tests of the modernised software were possible, among others, thanks to cooperation with the Interdisciplinary Centre for Mathematical and Computational Modelling at the University of Warsaw.

The latest version of the Hussar program makes it possible to design, for example, a device for time resolved fluorescence. Such devices use the fact that whenfemtosecond laser pulses enter the interior of a non-linear crystal together with a week fluorescence signal, a third beam appears, with frequency being the sum of both frequencies of the primary beams. The fluorescence signal can therefore be summed with the gating pulse, which provides exact information on the time of the fluorescence occurrence. The described processes, however, become particularly efficient when the angle between the interacting pulses is about 20 degrees. Simulating such systems went beyond the capabilities of the existing software. Now, using the Hussar program, beams that cross at angles of even 140 degrees can be modelled.

The improved software enables the design of optical experiments which had to be improved in laboratories through costly iterative experiments. For example, if one of the pulses is very strong, it changes the surroundings of the medium through which it travels. As a result, the second pulse behaves as if it is passing through a lens induced by the first pulse and consequently begins to focus. This phenomenon makes it possible to build ultra-fast snapshots, with a ‘shutter’ time of the order of femtoseconds. Such an experiment can now be designed and performed in a single iteration by a small optical laboratory. 

On the other hand, Hussar can also help with large optical projects, such as the design of non-collinear parametric amplifiers. These instruments can increase the power of laboratory lasers even to values counted in petawatts. There are equally interesting possibilities with regard to optical systems with three or more beams. Apparatus with this sort of construction is used, among others, in two-dimensional 2D-IR and photon echo spectroscopy.

Featured products

Lambda Research Corporation 

Lambda Research Corporation sets itself apart as a cost-effective, single-source solution for optical and illumination design. Lambda sells TracePro opto-mechanical software, known for its ease of use, CAD interface and accuracy in illumination design; OSLO optical design software, renowned for its power and flexibility in lens design; and RayViz – a ray-tracing add-in for Solidworks.

www.lambdares.com/tracepro

--

Synopsys 

Synopsys’ Code V has been leading optical design software innovation for over 40 years. Code V includes new solutions to increase optical engineering productivity, support cost-to-manufacture savings, and give reliable results in less time.

The Code V SpecBuilder feature helps designers easily track and communicate how well their optical system designs are meeting project specifications and goals.

Already delivering the industry’s most advanced optical design optimisation capability, Code V includes new optimisation constraints that give designers greater control over lens system manufacturability and are ideal for the design of compact objectives.

Extended freeform surface formulations help meet stringent packaging and image resolution requirements for compact camera systems.

Sophisticated algorithms and built-in expert tools enable the design of cutting-edge AR/VR systems.

www.synopsys.com/optical-solutions/codev.html

--

Other commercial products

Among the latest offerings in the optical software market is Photon Engineering’s FREDmpc, which has an new core architecture written to use the massively parallel computing capabilities of graphical processing units (GPUs). Compared to previous CPU based architectures, calculations using the GPU engine of FREDmpc are performed more than 100x faster.

FREDmpc takes advantage of the rapid advances in GPU hardware, which is highly scalable and low-cost. By adding, or upgrading, the GPU board in a PC, raytracing and analyses with FREDmpc can be performed orders of magnitude faster using GPUs than with conventional multi-threaded CPUs. Calculations previously thought to be unachievable on CPUs are now possible.

FREDmpc is currently the only fully functional, general purpose optical engineering software tool on the market leveraging GPUs.

Zemax’s Physical Optics Propagation (POP) tool in OpticStudio allows users to use diffraction calculations to propagate a wavefront through an optical system surface by surface.

Shooting a laser beam at a faraway target, or simulating light through a pinhole or other diffraction effects that are far away from focus, requires physical optics propagation. The coherent nature of light is fully accounted for by OpticStudio’s POP tool.

Version 10.0 of VPIphotonics’ Design Suite brings features to accelerate design and simulation of photonic communication systems for applications from short-reach interconnects based on multimode VCSELs, to metro and long haul links relying on advanced formats and coding. 

The capacity-approaching modulation formats can be explored with arbitrary geometric and probabilistic shaping, while FEC can be combined with probabilistically-shaped square M-QAM, to tailor the signal to a specific transmission channel. Performance estimation in terms of the mutual information is available. 

Addressing the delicate balance between complexity and performance, designers of direct-detection systems will benefit from the Kramers-Kronig receiver, for detection of QAM formats with a single photodiode. Design flow enhancements aim to further simplify the design and performance assessment of PAM systems.

LTI Optics has provided off-the-shelf and custom non-imaging optical design software for over 35 years, and has experts in illumination optics, including applications ranging from architectural lighting to consumer and medical products, and from UV and IR to daylighting and horticulture.  

Its software, Photopia and Photopia for Solidworks, allows users to prototype illumination systems inside of their mechanical software to iterate, improve and verify a design before cutting any tooling. Photopia has parametric optical design tools allowing users to create, manipulate and optimise optical geometry based on relevant optical parameters like aiming location. This makes it easy for non-experts to design optics in a fraction of the time. 

Photopia can hand a wide variety of optics styles, including roadway lenses, grow light reflectors, indicator light pipes, narrow TIR lenses, display light guides and any other non-imaging or illumination optic.

 

Category: