Hybrid fabrication technique enhances optical functionality

Share this on social media:

Sponsored by: 


Combining 3D printing with metal-coating and wet-etching processes enables metamaterial geometrical optics with unique properties

The geometry of a moth's eye has inspired a 3D printed antenna that absorbs specific microwave frequencies from any direction. Credit: Hojat Nejad

A team of engineers at Tufts University in the United States has produced a series of 3D-printed metamaterials with novel optical properties that cannot be produced using conventional processes. The technique has been used to create metamaterial embedded geometrical optics (MEGO) devices such as a moth-eye-like lens that can absorb electromagnetic signals from any direction at selected wavelengths, in addition to an optical parabolic mirror with both reflecting and filtering functionalities.

The research was released on 8 April in Microsystems & Nanoengineering, published by Springer Nature.

Metamaterials extend the capabilities of conventional materials in devices by making use of geometric features arranged in repeating patterns at scales smaller than the wavelengths of energy being detected or influenced. New developments in 3D printing technology are making it possible to create many more shapes and patterns of metamaterials, and at ever smaller scales. In the study, researchers at the Nano Lab at Tufts describe a hybrid fabrication approach using 3D printing, metal coating and etching to create metamaterials with complex geometries and novel functionalities for wavelengths in the microwave range.

For example, they developed devices such as parabolic reflectors that selectively absorb and transmit certain frequencies. Such concepts could simplify optical devices by combining the functions of reflection and filtering into one unit. ‘The ability to consolidate functions using metamaterials could be incredibly useful,’ said Sameer Sonkusale, professor of electrical and computer engineering at Tufts University’s School of Engineering and corresponding author of the study. ‘It’s possible that we could use these materials to reduce the size of spectrometers and other optical measuring devices so they can be designed for portable field study.’

The products of combining optical/electronic patterning with 3D fabrication of the underlying substrate are referred to by the authors as metamaterials embedded with geometric optics (MEGOs). Other shapes, sizes, and orientations of patterned 3D printing can be conceived to create MEGOs that absorb, enhance, reflect or bend waves in ways that would be difficult to achieve with conventional fabrication methods.

There are a number of technologies now available for 3D printing, and the current study uses stereolithography, which focuses light to polymerise photo-curable 
resins into the desired shapes. Other 3D printing technologies, such as two photon polymerisation, can provide printing resolution down to 200nm, which enables the fabrication of even finer metamaterials that can detect and manipulate electromagnetic signals of even smaller wavelengths – potentially including visible light.

‘The full potential of 3D printing for MEGOs has not yet been realised,’ said Aydin Sadeqi, graduate student in Sankusale’s lab at Tufts University School of Engineering and lead author of the study. ‘There is much more we can do with the current technology, and a vast potential as 3D printing inevitably evolves.’ 

Sponsored product - EDMUND OPTICS

Accurate optical coating design and production can mean the difference between the component failing in the field, or lasting for the intended lifetime of the project.  Edmund Optics® has extensive coating capabilities, and expertise in producing coatings for advanced diagnostic applications, harsh environment imaging assemblies, and applications throughout the ultraviolet (UV), visible (VIS), and infrared (IR) spectral regions. All optics are meticulously cleaned, coated, and inspected in a clean room environment, and subjected to the environmental, thermal, and durability requirements specified by our customers.

Edmund Optics® can offer single and multi-layer anti-reflection, filter, polarizing, and metallic coatings with an internal database of over 900 designs from 120nm to 20µm. Standard optical components with dozens of stock AR coatings and metallic coatings are available from our extensive inventory. Where stock options won’t work our experienced coatings engineers can work with you to design a custom solution at one of our state-of-the-art coating facilities.


Sponsored poduct - ADMESY

Admesy offers a broad range of test and measurement instruments focused on colour and light measurements in inline production process environments. Our compact and robust devices are designed for accurate high-speed measurements with a low maintenance need. 

The Rhea is Admesy’s high-end spectrometer with a cooled CCD detector and neutral density filter wheel, combining great sensitivity and dynamic range.

It offers a selection of (fixed) grating and slit choices to fit your specific wavelength and FHWM requirements. Combined with an Admesy light source, it is the perfect solution for transmissive filter measurements.

The Hera is a compact, cost-effective spectroradiometer based on a transmissive grating design, available in three fixed wavelength ranges.

The Cronus combines a transmissive-grating based spectrophotometer with a tri-stimulus colorimeter. This unique combination offers both accurate spectral measurements and fast colorimeter measurements in one device.

All devices are available in various optical configurations, varying from a fixed lens or cosine corrector, to fibre attached accessories.


Sponsored product - ISP Optics

LightPath Technologies' subsidiary, ISP Optics, thin film coating lab offers a broad variety of deposition technologies allowing us to create custom coating solutions for the most demanding applications. We are experts in optical thin film designs, with extensive experience designing virtually every type of thin film (antireflection, high reflection, partial reflection, bandpass, etc.). We focus on leading the industry in applications in SWIR, MWIR, LWIR, and multiband hyperspectral regions as well as moisture protective coatings on hygroscopic crystals including KBr and KRS.

ISP Optics is known in the industry for world-class solutions for laser designator and rangefinder applications, Forward Looking Infrared (FLIR), and Thermal Imaging. Our expertise in thin film coatings gives us the industry advantage in producing extremely stable dielectric coatings on a wide range of substrate materials including chalcogenides, germanium, silicon, zinc sulfide and zinc selenide. Our proprietary design solutions lead the industry in adhesion, hardness and durability requirements and can be deposited on various shapes and sizes including plano, radius, asphere and freeform.


Other commercial products

Among the latest offerings in the optical coatings market are chalcogenide glass coatings from Ophir Optronics Solutions for IR athermal systems. Chalcogenide infrared glasses have increased in popularity recently as they enable simple athermal system design. Transparent in the infrared spectrum, these glasses are a mix of a few elements, close to the metalloid line in the periodic table. 

When shaped into optical components, finding appropriate optical coatings is challenging, as chalcogenide behaves differently than popular crystals. Lower T-glass causes the glass to lose its shape at a lower temperature, and thermal shock sensitivity is also limiting. The coating process temperature must be lowered, making it hard to achieve good adhesion and environmental durability. 

Ophir Optronics Solutions has developed adhesion materials that hold the coatings to this special substrate.

Laser Components now relies on online broadband monitoring during optical coating processes, and a diode spectrometer is used to monitor the visible spectrum. 

For many demanding applications, dielectric optical coatings are specified and manufactured to meet strict reflectivity values, sometimes at multiple wavelengths or over a broad band. In order to achieve such precision, the coating layer thickness must be determined and met. 

Typically, there are three methods of monitoring this; measuring a witness sample, monitoring the behaviour of a quartz crystal, or simply using a timer. These methods are not sufficient to meet the growing demands on today’s laser optics. 

Broadband monitoring is used in Laser Components’ IAD and IBS coatings. An empty hole in the substrate holder lets through unfiltered light from the BBM lamp, and an area without a hole gives a dark current. 

These reference values are compared with the incoming signal through a reference window, allowing the current layer thickness to be determined with an absolute accuracy of ±0.5nm. 

Iridian designs and manufactures custom optical filter and coating solutions from 300nm to 10µm for applications including tele/datacom, spectroscopy, 3D cinema, sensing and detection, lidar, satellite earth observation and communications, astronomy, among others.  

The company’s energetic sputtering coating technology and proprietary design, monitoring, and control software produces filters with high wavelength selectivity (single or multiple band-pass or notch filters, edge pass filters, and so on) to exacting quality standards for performance, durability, and reliability. 

Crystalline Mirror Solutions (CMS) produces ultra-high reflectivity supermirrors made by substrate transfer and direct bonding. These semiconductor-based interference coatings set new standards for applications spanning defence, astronomy, and high power laser systems, and are employed in the world's most stable interferometers for metrology, while providing significant performance advantages for laser machining and mid-infrared cavity-enhanced spectroscopy systems.