Terahertz laser pulses amplify optical phonons in solids

Share this on social media:


Sponsored by:

The amplification of phonons in solids represents a further step towards new phononic devices for the next generation of sensors, mobile phones and computing 

The amplification of light through stimulated emission or nonlinear optical interactions has had a transformative impact on modern science and technology. The amplification of other bosonic excitations, like phonons in solids, is likely to open up new physical phenomena.

A study led by scientists of the Max Planck Institute for the Structure and Dynamics of Matter (MPSD) at the Centre for Free-Electron Laser Science in Hamburg, Germany, has demonstrated the amplification of optical phonons in a solid by intense terahertz laser pulses. These light bursts excite atomic vibrations to very large amplitudes, where their response to the driving electric field becomes nonlinear and conventional description fails to predict their behaviour.

In this new realm, fundamental material properties, usually considered constant, are modulated in time and act as a source for phonon amplification. The paper, Parametric Amplification of Optical Phonons,was published in the Proceedings of the National Academy of Sciences of the United States of America at the end of last year. 

When light excites the material and induces large atomic vibrations at frequency ω (blue wave), fundamental material properties are modulated in time at twice such frequency (red wave), acting a source for phonon amplification. Credit:  Jörg Harms / MPSD

The group, led by Professor Andrea Cavalleri at the MPSD, has pioneered the field of controlling materials by driving atomic vibrations (ie phonons) with intense terahertz laser pulses. If the atoms vibrate strongly enough, their displacement affects material properties. This approach has proven successful in controlling magnetism, as well as inducing superconductivity and insulator-to-metal transitions. In this field, it is then important to understand whether the phonon excitation by light can be amplified, potentially leading to performative improvements of the aforementioned material control mechanisms.

In the recent work, Cartella, Cavalleri and coworkers used intense terahertz pulses to resonantly drive large-amplitude phonon oscillations in silicon carbide and investigated the dynamic response of this phonon by measuring the reflection of weak (also resonant) probe pulses as a function of time delay after the excitation.

‘We discovered for large enough intensities of our driving pulses, the intensity of the reflected probe light was higher than that impinging on the sample,’ said Andrea Cartella. ‘As such, silicon carbide acts as an amplifier for the probe pulses. Because the reflectivity at this frequency is the result of the atomic vibrations, this represents a fingerprint of phonon amplification.’

The scientists were able to rationalise their findings with a theoretical model that allowed them to identify the microscopic mechanism of this phonon amplification.

These findings build on another discovery by the Hamburg group published earlier this year, showing phonons can have a response reminiscent of the high-order harmonic generation of light. These new discoveries suggest the existence of a broader set of analogies between phonons and photons, paving the way for phononic devices. 

The Centre for Free-Electron Laser Science (CFEL) is a joint enterprise of DESY, the Max Planck Society and the University of Hamburg. This collaboration also involved Professor Roberto Merlin, of the University of Michigan.

OPOs and OPAs -the latest commercial products

ADMESY - Featured product

Admesy offers a broad range of test and measurement instruments focused on colour and light measurements in inline production process environments. Our compact and robust devices are designed for accurate high-speed measurements with a low maintenance need. 

The Rhea is Admesy’s high-end spectrometer with a cooled CCD detector and neutral density filter wheel, combining great sensitivity and dynamic range.

It offers a selection of (fixed) grating and slit choices to fit your specific wavelength and FHWM requirements. Combined with an Admesy light source, it is the perfect solution for transmissive filter measurements.

The Hera is a compact, cost-effective spectroradiometer based on a transmissive grating design, available in three fixed wavelength ranges.

The Cronus combines a transmissive-grating based spectrophotometer with a tri-stimulus colorimeter. This unique combination offers both accurate spectral measurements and fast colorimeter measurements in one device.

All devices are available in various optical configurations, varying from a fixed lens or cosine corrector, to fibre attached accessories.


HÜBNER Photonics - Featured product

The C-WAVE, by HÜBNER Photonics, is a unique, tunable, single frequency cw OPO, covering 450 to 650nm and 900 to 1300nm. In the region 450 to 650nm output, powers of up to 200mW are available while at 900 to 1300nm output powers, up to 400 mW are available. C-WAVE has been developed as a high precision and versatile laser serving demanding applications in atomic physics and quantum optics.

A new feature of ultimate wavelength control, called AbsoluteLambda, offers the opportunity for an automised selection of wavelength with high accuracy (set point +/- 1MHz) and a drift-free wavelength stabilisation (+/- 1MHz). 


Other commercial products

In February, Toptica's optical parametric oscillator (OPO) laser system won a Prism Award at Photonics West in San Francisco.

For molecular spectroscopy and quantum optics, the DLC TOPO delivers wide tunability, narrow linewidth, and hands-free digital control over the 1.4 to 4.0μm spectral range. A wide mode-hop free tuning range of up to 300GHz enables visibility of full spectroscopic signatures, while a 2MHz linewidth reveals narrow atomic and molecular features. Being fully motorised and driven by the digital laser controller DLC pro make it easy to use. 

Also at Photonics West, Elforlight, an AMS Technologies company, introduced a new concept that allows laser pulses to be emitted with four different wavelengths in the visible range.

The company says that due to the high switching frequency, systems based on this concept have the potential to exceed previous tuneable lasers based on OPOs at considerably lower costs.

Elforlight’s concept allows switching from pulse to pulse between these four wavelengths with a high pulse repetition rate of 1kHz – typical frequencies of such OPO systems range from 100 to 200Hz. The technical basis is a process that uses the Raman effect to additionally generate the wavelengths 555, 579 and 606nm from the light of a 532nm laser. An optical filter then separates the four wavelengths and periodically routes each wavelength at a switching frequency in the kilohertz range to the optical output of the unit.

Further possibilities result from a modified arrangement of the laser material, as the wavelengths 559, 588 and 621nm can thus be generated alternatively.

Coherent’s compact Chameleon OPO is a wavelength extension up to 1,600nm giving a combined tuning range of 680 to 1,600nm when used with a Chameleon Ultra or Vision laser as a pump source.

The OPO signal output is tuneable between 1,000 and 1,600nm without optics changes. An idler option is also available to access wavelengths from 1,750 to 4,000nm. 

The pump laser wavelength and OPO wavelength can be tuned independently, enabling two colour imaging or pump/probe applications. Specifically, the laser pump wavelength can be varied between 740 and 880nm with simultaneous independent tuning of the OPO in the IR.

In January, Chromacity, a provider of ultrafast laser systems, introduced a low-cost near-infrared OPO. 

To date, ultrafast OPO technologies have typically required users to connect multiple systems together, but the Chromacity OPO has been developed as a compact single unit that both easy to use and, at under £100,000, is cheaper than similar solutions, according to the company.

Operating in the near-infrared, the Chromacity OPO can generate light from 1,400 to 4,200nm with picosecond pulse durations, making it suitable for a wide range of industrial and scientific applications, from FTIR micro-spectroscopy and stand-off detection to gas sensing and powder spectroscopy.

Excelitas’ iFlex-Agile CW OPO is a high-power, continuous-wave OPO featuring optimised optics for a full wavelength range with powers on the Watts-level and rapid tunability to enable seamless operation.

This instrument’s high-precision optics ensure excellent focusing and consistent beam emission for high accuracy in mass spectrometry, material testing, spectroscopy and metrology applications.