PIC method set to speed-up coherent lidar

Share this on social media:

An illustration of lidar waves. Credit: Johann Riemensberger

In a study published in Nature, researchers at the École polytechnique fédérale de Lausanne (EPFL) demonstrate a new way to speed up coherent lidar engine by using photonic circuits.

Most modern lidar sensors rely on the time-of-flight operation principle where short pulses or pulse patterns are emitted from the sensor aperture and the power of back-reflected light is detected using a square-law photodetector.

A different principle is that of coherent laser ranging, most importantly frequency-modulated continuous wave (FMCW) lidar, where the laser is set up to emit linear optical frequency chirps. Heterodyne mixing with a replica of the emitted laser light maps the target distance to a radio frequency.

Coherent detection has many inherent advantages such as enhanced distance resolution, direct velocity detection via the Doppler effect, and imperviousness to sunlight glare and interference. But the technical complexity of precisely controlling narrow-linewidth frequency-agile lasers has so far prevented the successful parallelisation of FMCW lidar.

Now, researchers at the lab of Tobias Kippenberg at EPFL have found a new way to implement a parallel FMCW lidar engine by using integrated nonlinear photonic circuitry. They coupled a single FMCW laser into a silicon-nitride planar microresonator, where the continuous wave laser light is converted into a stable optical pulse train due to the double balance of dispersion, nonlinearity, cavity pumping and loss. 

'Surprisingly, the formation of the dissipative Kerr soliton, does not only persist when the pump laser is chirped, but transfers the chirp faithfully to all the generated comb teeth,' said Johann Riemensberger, postdoc at Kippenberg’s lab and first author of the study.

The small size of the microresonator means that the comb teeth are spaced 100GHz apart, which is enough to separate them using standard diffraction optics. Because each comb tooth inherits the linear chirping of the pump laser, it was possible to create up to 30 independent FMCW lidar channels in the microresonator.

Each channel is capable to measure distance and velocity of a target simultaneously, while the spectral separation of the different channels makes the device immune to channel crosstalk, as well as a natural fit for co-integration with recently deployed optical phased arrays based on photonic integrated optical grating emitters.

The spatial separation of emitted beams and operation in the 1,550nm-wavelength band relaxes otherwise stringent eye and camera safety limitations. 'The technology developed here at EPFL could improve acquisition rates of coherent FMCW lidar tenfold in the near future,' says Anton Lukashchuk, PhD student in Kippenberg’s lab.

The concept relies on high-quality silicon-nitride microresonsators with record-low losses amongst planar nonlinear waveguide platforms, which were produced at EPFL’s Centre of MicroNanotechnology (CMi). The silicon-nitride microresonators are already commercially available by EPFL spinoff Ligentec SA that has specialised on fabrication of silicon nitride-based photonic integrated circuits (PIC).

This work paves a way for the widespread application of coherent lidar in autonomous vehicle applications in the future. The researchers are now focused on heterogeneous co-integration of laser, low-loss nonlinear microresonators, and photodetectors in a single and compact photonic package.

FormFactor's fast photonic wafer probers enable rapid tests through faster photonic alignment than previously possible. (Credit: FormFactor Inc)

07 September 2021

Jose Capmany (left) is co-founder and COO of iPronics, Daniel Perez-Lopez (right) is co-founder and CTO of iPronics.

05 August 2022

The chipset has integrated lasers directly driven from a digital signal processor without the use of any external driver chip, providing exceptional total system performance.

11 August 2022

Jose Capmany (left) is co-founder and COO of iPronics, Daniel Perez-Lopez (right) is co-founder and CTO of iPronics.

05 August 2022

Aeva’s Aeries II lidar module has a sensing range of up to 500 metres, and is able to measure velocity for each pixel. (Image: Aeva)

02 August 2022

Here two electronic driver chips are connected face down to a silicon photonics chip.The horseshoe-shaped device is an optical modulator, which can be used as part of a programmable circuit. (Image: Optoelectronics Research Centre)

28 July 2022

Photonic chips offer lower latency, lower power consumption and higher bandwidth than electronic chips. (Image: iPronics)

28 July 2022